Full Description
View Full Description
Shape your sound
The JVM210C comes designed with two channels. However, it’s so much more than that. Each channel features three modes: green, orange, and red. With these, you are able to adjust your tone to achieve different levels of overdrive ranging from crisp and clean to powerful and distorted. You are also provided with a 3-band EQ on each channel that allows you to shape your sound in order to find your desired tone. The perfection doesn’t stop there though. You also have access to reverb, presence, and resonance. The presence gives more control over the upper mids, and resonance over the bass. Its reverb thickens the sound and makes it more echoey, adding atmosphere. All these make this amp suitable to accommodate a variety of genres and styles.
Handsfree effects
Alongside your amplifier, you receive an included footswitch with four buttons that allow you to switch between pre-saved modes. Using the footswitch during your performance makes your set run smoother, as you can change your tone during a performance, for added drive in a solo, and you don’t have to wait in between songs to switch your amplifier’s voicing. It also ensures that all your tones will be perfect while you play, as you have the option to find your ideal sound and save it with ease. Always sound pitch perfect.
Perfect tone
This amp is equipped with four EL34 power tubes and five ECC83 preamp tubes that produce a tight, saturated, and harmonically rich tones. The tubes also ensure that you can turn down the volume and still sound pitch perfect when you turn up the preamp tubes. High-quality, no matter how you set up your amplifier.
Specifications
- Product Code: JVM210C
- Range: JVM
- Technology: Valve
- Channels: 2
Speakers and Valves
- Speaker Configuration: 2x12”
- Speaker Models: 1x Celestion Vintage, 1x Celestion Heritage
- Impedance: 16Ω
- Preamp Valves: 4x ECC83, 1x ECC83 (Phase Splitter)
- Power Amp Valves: 4x EL34
Electronics
- Output Wattage: 100W
- Speaker Outputs: 5x 1/4” Jack Sockets , Emulated Line Out, MIDI Thru
- Inputs: 1x 1/4” Jack Instrument Input, MIDI In, Footswitch
- Controls: Channel and Mode Select, Gain, Treble, Middle, Bass, Volume, Reverb, Presence, Resonance, Master Volume Select, Master Volume
- Effects: Digital Reverb
- Effects Loop: 2 (1x Series Parallel, 1x Series)
Dimensions
- Width: 690mm/27.2”
- Height: 510mm/20.1”
- Depth: 265mm/10.4”
- Weight: 34.5kg
