DigiTech SC-2 Valve Distortion Guitar Pedal

More details:

Features:

• 2 Modes of operation: Crunch Mode gives you plenty of gain with mids that cut through and Scoop Mode adds more gain and removes the mids for a modified tone.
• True Bypass circuitry preserves your tone in bypass.
• Constant high-voltage operation for tonal quality and noise reduction.

True Bypass. HardWire pedals modify your guitar tone only when you want. HardWire pedals add pure effects when they're on and don't add noise when they're off - truly the best of both worlds. And if you happen to lose power to HardWire pedals in the middle of a performance, you can keep playing because HardWire pedals switch to True Bypass mode until power is restored.

Higher Voltage. HardWire pedals preserve guitar tone because they operate at a significantly higher voltage than your standard pedals. HardWire pedals get the most out of hot guitar pickups and perform flawlessly in the high voltage environment of an amplifier effects loop.

Constant Voltage. HardWire pedals guarantee constant effects performance throughout the life of the battery and prevent tone loss because they operate at a steady voltage - independent of decaying battery voltage.

Tourworthy. HardWire pedals are designed for the touring musician. Unique Stomplock guards prevent controls from being kicked and your tone from being changed. Each HardWire pedal includes custom-cut Velcro® pads to fasten it to a pedalboard and green gaffer tape for the actuator label and see the pedal in the most adverse stage lighting conditions.

Inputs/Outputs

• Instrument/Guitar Input: 1/4" Unbalanced (Tip-Sleeve)
• Input Impedance: 1 MOhms
• Output: ¼" Unbalanced (Tip-Sleeve)

Power

• UK: 240 VAC, 50 Hz Adapter: PS200R - 240
• Power Input: 9 VDC
• Power Consumption: 190mW
• Battery Type: Single 9 VDC
• Battery Life: 19 Hours

General

• Dimensions: 4" Width x 5.5" Length x 2.6" Height
• Weight: 1.3 lbs