Full Description
View Full Description
Your instrument - set free
The SLX-D body pack system lets you integrate your guitar with forward thinking wireless technology. Securely transmitting your performance over a 100 meter range.
One-press IR sync establishes a rock solid connection from your bodypack transmitter to receiver in a matter of seconds. Whilst a mini LCD screen and intuitive controls let you see what's important. Navigate between group/channel, frequency, or battery runtime with ease. You can also engage 'lock mode' to prevent unwanted button presses mid-performance.
Powerful rechargeability options
SLX-D transmitters give you 8 hours of use from one pair of AA batteries. But why not take advantage of Shure's revolutionary rechargeable technology?
The optional SB903 lithium ion battery provides a hefty 10 hours of run time. And you can see exactly how much life is left directly from your transmitter.
There are a variety of charging options too: the SBC10-903 Single-Battery USB charger. Or the SBC203 Dual Docking Station - which allows battery charging in or out of their transmitters thanks to external charging contacts. It only takes 2.5 hours to reach full power. Or in emergencies, a 15 minute quick-charge provides a vital hour of use.
Built for hard touring
A faulty wireless system can have show stopping consequences. Which is why SLX-D receivers are virtually bullet-proof. Made from enforced galvanized steel and put through extreme testing procedures, SLX-D is ready for the long haul. And then some.
And with the included rackmount kit you can install you're entire wireless rig into a hardcase. For convenient and safe transportation from venue to venue.
Included In The Box
- 1 x SLXD1 Bodypack Transmitter
- 1 x SLXD4 Receiver
- 1 x WA305 Instrument Cable
- 2 x 1/4 Wave Antennas
- 1 x Rackmount Kit
- 1 x Zipper Bag
- 1 x Power Supply
- 2 x AA Batteries
Features
SLXD1 Digital Wireless Bodypack Transmitter
- Clear, uninterrupted signal over 100 meter range
- Up to 8 hours of continuous use with 2 AA batteries
- IR sync pairs transmitter with receiver at the push of a button
- Exceptionally detailed 24-Bit / 48kHz digital audio with over 120 dB of dynamic range
- Backlit LCD screen with easy to navigate menu and controls
- Selectable display shows group/channel, frequency, or battery runtime
- Lock mode avoids any accidental changes
- 4-Pin male mini connector (TA4M)
- Detachable 1/4 wave antenna
SLXD4 Digital Wireless Receiver
- Run up to 32 systems in a 44mHz band; 10 systems per 6MHz TV band; 12 systems per 8 MHz band
- Manage multiple system group scans, firmware updates and control via Ethernet
- Automatic Channel Scan quickly finds clear frequencies
- Digital Predictive Switching completely eliminates drop-outs
- Full bandwidth 20Hz-20kHz frequency response
- High resolution LCD menu and intuitive controls
- Lock mode avoids any accidental changes
- Half rack format with detachable BNC 1/4 wave antennas
- Tour proof galvanized steel housing
- XLR and 6.3mm instrument output
Specifications
SLXD4 Receiver
- Weight: 1.8 lb (816 g), without antennas
- Dimensions (H x W x D): 42 × 197 × 152 mm
- Power Requirements: Supplied by included power supply
- RF Input:
- Spurious Rejection: > 75 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Audio Output:
- Gain Adjustment Range: –18 to +42 dB in 1 dB steps
- Configuration: 1/4" (6.35 mm) and XLR: Balanced
- Impedance: 50 Ω
- Full Scale Output: 1/4": +12 dBV, XLR: LINE setting = +15 dBV, MIC setting = −15dBV
- Mic/Line Switch: 30 dB pad
- Phantom Power Protection: Yes
- Networking:
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100 m (328 ft)
SLXD1 Bodypack Transmitter
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- Battery Type: Shure SB903 Rechargeable Li-Ion or AA batteries 1.5 V
- Battery Runtime:Shure SB903: up to 10 hours, AA: up to 8 hours
- Dimensions (H x W x D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
- Weight: 3.1 oz (89 g) without batteries
- Housing: PC/ABS
- Audio Input:
- Connection: 4-pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (7.27 Vpp)
- Preamplifier Equivalent Input Noise (EIN): −118 dBV, A-weighted, typical
- RF Output:
- Connector: SMA
- Antenna Type: 1/4 wave
- Impedance: 50 Ω
- Occupied Bandwidth: 200kHz
- Modulation Type: Shure proprietary digital
- Power: 1 mW or 10 mW
