Full Description
View Full Description
Achieve the perfect EQ
The GE601 Graphic Equalizer Pedal from Maxon allows you to add a whole new palette of tones to your existing guitar rig without breaking your bank. Equipped with six carefully selected frequency bands over a five octave range with 12 dB of Boost/Cut per band (100, 200, 400 & 800 Hz, 1.6 & 3.2 KHz respectively), this versatile pedal offers a full variety of different tones. Each of the six controls can be easily tweaked to fine tune your sound, and accommodates both guitar and bass. Hold the power of revolutionary pedal performance beneath your very feet, helping you to elevate your playing to the next level.
Fine tune your sound
The GE601 allows you to turn a Humbucker into a Single Coil, give a passive Bass the clarity and punch of an active instrument, make a single coil electric simulate the bright, chiming sound of an acoustic guitar with piezo pickup, emulate the tone of a wah pedal with the treadle set half-way forward and use as a clean booster for solos or to overdrive an amplifier’s input. With all these tonal varieties, the GE601 is the must have accessory for any pedalboard and can be used as a complementary tonal tool to your set up - or as a base for the sound of your entire rig.
About Maxon
Maxon started out in Japan in 1965 under the name Nisshin Onpa, manufacturing guitar pickups before producing OEM products for other companies. Nisshin Onpa was responsible for designing and manufacturing many legendary pedals while working in partnership with Ibanez, including the TS-808/TS808 and TS9 tube screamers. Although many of the pedals Maxon created were released under the Ibanez name, Maxon was producing pedals under their own name, and in 2002 when the two companies parted way, Maxon began to push its name as a manufacturer of high-quality effects pedals. Today Maxon produce "hard-to-find" vintage type effects pedals, and are used by many artists such as Pearl Jam, Troy Van Leeuwen, Steve Stevens, Brad Whitford, and many more.
Specifications
General
- Input Impedance: 500K Ohms
- Input Jack: 1/4 Inch Standard Phone Jack
- Output Impedance: 10K Ohms
- Output Jack: 1/4 Inch Standard Phone Jack
- Output: 1
- Controls: 6 x Cut/Boost, 1 x Level
- Switch: Normal/Effect
- Noise Input: 2 dBu
- Noise (IHF-A): -110 dBu
- Max Amplitude: 12 dB
- Frequency Range: 100Hz 3.2KHz
- Accessories:
- 9V Manganese Dry Cell Battery (S-006P)
- Non-Skid Pad
- Warranty Card
- User Manual
Power Specs
- Power Supply: 9V Manganese Dry Cell Battery (S-006P) or Special AC Adaptor
- Power Voltage: DC9 V (Battery) / DC10 V (AC-Adaptor)
- Current Consumption: 11 mA (9V) / 12 mA (10 V)
- AC Adaptor: AC210N (option)
- Input: AC120V
- Output: DC9V/200 mA Center - / Sleeve +)
Dimensions
- Width: 70mm
- Depth: 112mm
- Height: 55mm
- Weight: 240g (Approx.)
Please Note: Pedal does not come with an AC adaptor
