Behringer EP4000 Europower Amp - Secondhand

Full Description

Intuitive set up

The sleek black fascia features an intuitive control panel. Thanks to this, Behringer empower you to be able to assess how the amplifier is reacting to the performance at a glance. Turning on the amplifier is as simple as flipping the main switch, when the power LED lights up you're good to go. Both channels provide you with independent gains. The easy to read clip LEDs allow you to see when a signal is distorted and the gain needs to be reduced.

Perform under pressure

Behringer understands the unpredictability that comes with live sound. No performance is immune to stage vibrations, mic drops and low-frequency build-up. However, the EP4000 provides a 2-stage low cut filter. You'll be free to decide whether you want to remove frequencies below 30 or 50 Hz. This will improve the overall quality of your mixes, adding tonnes of punch and energy. You'll be able to choose between stereo or mono modes. Allowing you to create mixes that suit every performance environment and scenario.

Features

• 2 x 2,000 watts into 2 ohms; 2 x 1,400 watts into 4 ohms; 4,000 watts into 4 ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance
• XLR and 1/4" TRS input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Selectable low-frequency filters remove damaging infra-sound frequencies
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• "Back-to-front" ventilation system including air filter for reliable operation
• "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis

Specifications

• Distortion: ≪ 0.02
• Frequency Response: 20Hz - 20kHz, 0dB/-1dB
• Damping Factor: ≫ 300 @ 8 Ohms
• Input Sensitivity: 1.23V (+3.4dBu)
• Input Impedance: 10k Ohms Unbalanced/20k Ohms Balanced
• Front Controls:
  • Power Switch
  • Gain (Channels 1 and 2)
• Rear Controls: DIP Switches (10x)
• Indicators:
  • Power: Green LED
  • Clip: Red LED, 1 Per Channel
  • Signal: Yellow LED, 1 Per Channel
• Input Connectors:
  • XLR
  • 1/4" TRS
• Output Connectors:
  • Binding Post
  • SpeakON
• Cooling: Continuously Variable Speed Fan, Back-to-Front Air Flow
• Open Circuit Type: Class H Complementary Linear Output
• Power Consumption: 2600W
• Mains Connector: Standard IEC
• Dimensions: 3.5" x 19" x 15.8" / 88mm x 483mm x 402mm (H x W x D)
• Weight: 36.6lbs / 16.6kg
• Product Code: EP4000