Alto RMX1508 1500W Powered DSP Cabinet Mixer - Nearly New

Full Description

View Full Description

The RMX1508DFX includes everything you need to tackle virtually any live performance. It starts with an ultra-clean 1500 watts of Class D power to drive your speakers of choice. Class D amplification makes the RMX1508DFX not only powerful but incredibly light compared to other solutions so you won't break your back bringing it to the venue. Running the RMX1508DFX in stereo will deliver 2 x 750W at 4-ohms of pure, clean power.

We didn't stop at just delivering clean power for this powerhouse cabinet mixer. The RMX1508DFX also features an incredibly useful array of tools that can make your events world-class. The RMX1508DFX includes 18 total inputs including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX1508DFX.

Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

Make the professional choice for a portable cabinet mixer with the EMPIRE RMX-series.

Features / Specifications:

• 18 total inputs including 8 XLR jacks with phantom power, 8 line jacks and stereo RCA.
• On-board digital effects processor and 3-shelf EQ on each mono and stereo channel
• Continuous 2 x 750W power at 4-ohms; 1500W at 8-ohms Bridged
• Class D Power

Mono Input Channels:

• Microphone input: Electronically balanced, discrete input configuration
• Frequency response: 10Hz to 55kHz, +/?3dB
• Distortion: (THD & N) 0.006 at +4dBu, 1kHz
• Gain: 50dB (MIC)
• SNR: (Signal to Noise Ratio) >90dB
• Line input: Electronically balanced
• Frequency response: 10Hz to 55kHz, +/?3dB
• Distortion: (THD & N) 0.04 at +4dBu, 1kHz
• Gain: 30dB

Stereo Input Channels:

• Line input: Unbalanced
• Frequency response: 10Hz to 55kHz, +/?3dB
• Distortion: (THD & N) 0.006 at +4dBu, 1kHz

Impedances:

• Microphone input: 1.4kOhm
• Channel Insert return: 2.5kOhm
• All other inputs: 10kOhm or greater
• Tape out: 1kOhm
• All other output: 120Ohm

Equalisation:

• Hi shelving: +/?15dB @12kHz
• Mid bell: +/?15dB @2.5kHz
• Low shelving: +/?15dB @ 80Hz

DSP Section:

• A/D and D/A converters: 24-bit
• DSP resolution: 24-bit
• Type of effects: Hall, Room, Vocal & Plate Reverb, Mono & Stereo DELAY (max delay time 650ms), Chorus, Flanger & Reverb Modulations, Reverb+Delay, Reverb+Chorus, Reverb+Flanger combinations
• Presets: 256
• Controls: 16-position PRESET Selector; 16-position VARIATION selector, CLIP LED; MUTE SWITCH with LED indicator

Main Mix Section:

• Noise: (Bus Noise) Fader 0 dB, channels muted:?85dBr (ref.:+4dBu), Fader: 0dB, all input channels assigned and set to UNITY gain:?71dBr (ref.:+4dBu)
• Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
• AUX Sends max out: +22dBu

Output Power:

• Stereo Mode: 680W(RMS) @ 4ohm, 770W(EIAJ) @ 4ohm, 429W(RMS) @ 8ohm, 399W(EIAJ) @ 8ohm
• Bridge Mode: 1553W @ 8ohm

Power Supply:

• Main Voltage: 100-120VAC 60Hz, 220-240VAC 50Hz
• Fuse: 100 120V: T10A 250V, 220 240V:T6.3A 250V

Other Specs:

• Dimensions (WxLxH): 550mm x 220mm x 310mm

Please note, the original boxing is scuffed and the seals are broken, the manual is also missing, otherwise the unit itself looks and operates as new. It was returned unwanted by a customer under our 14 day money back guarantee.

This is a great opportunity to buy a fully functioning, nearly new product at a discounted price, supplied with a two year warranty.