Markbass Little Mark Tube Bass Amp Head - Ex Demo

Full Description

On the front panel there are two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or a 1/4" cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of EQ, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rearpanel), and mute control (push-pull on the master knob).

Inputs

• Input 1: impedance 500 Kohm, max. voltage 15 Vpp
• Input 2 (Balanced XLR/1/4" combo): balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
• Effect Return: impedance 33 Kohm, max. voltage 10 Vpp

Controls

• Gain 1: -60 dB to +23 dB range
• Gain 2: -60 dB to +23 dB range
• Mix: mixes tube and solid state gain
• Master Volume: Line Out Level
• Ground Lift: switch on rear panel
• Pre/Post EQ: switch on rear panel
• Mute: push/pull on master knob

Equalisation

• Low: center frequency: 60 Hz; level: ±16 dB
• Low Mid: center frequency: 360 Hz, level: ±16 dB
• High Mid: center frequency: 800 Hz, level: ±16 dB
• High: center frequency: 5 kHz, level: ±16 dB
• VPF (Variable Pre-shape Filter): center frequency 380 Hz (cut)
• VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz (cut)

Output

• Line Out: balanced XLR, max. voltage 20 Vpp
• Effect Send: unbalanced, max. voltage 20 Vpp (pre-EQ)
• Tuner Out: unbalanced, max. voltage 2 Vpp
• Speaker Out: speakon/1/4" combo, 1/4"

Other

• Weight: 6.55 lbs / 2.97 kg
• Output Power: 300W RMS @ 8 ohm, 500W RMS @ 4 ohm

This item is an ex showroom display model. As such, there are light scuffs and signs of use around the finish. These marks are subtle and are only really noticeable when looking closely in the light. Otherwise the amp looks and plays as new. The original box is scuffed.

This is a great opportunity to buy a fully functioning product at a discounted price, supplied with a two year warranty.