Radial StageBug SB-2 Passive DI Box - Secondhand

Full Description

Performance meets practicality

Ultra-compact. Without compromising on quality. The SB-2 gets its superior audio from an ultra-quiet isolating transformer that reduces susceptibility to unwanted noise. By converting your signal from high to low impedance, you’ll get clear connection, on stage and in the studio. Plug into your PA directly via the dedicated thru output. And run long cables without signal degradation. All without needing batteries or power cables. This is the ultimate companion for active basses and keyboards.

Features

• Get the best sound from your active basses and keyboards
• Fit neatly into your instrument case thanks to an ultra-compact design
• Plug in and play design – no batteries needed thanks to a passive circuit
• Instantly reduce input sensitivity for active bass guitars and keyboards with the 15dB pad
• Connect instruments to the on-stage amplifier directly via Thru output
• Connect your guitar or bass without distortion with the unbalanced hi-Z input
• Pristine connection for your PA system or audio workstation with the Lo-Z balanced output
• Quickly reduce hum and buzz caused by ground loops with the lift switch
• Robust construction protects against knocks, scratches, and scrapes

Specifications

• Audio circuit type: Passive, transformer based
• Number of channels: Two channels, mono or stereo outputs
• Frequency response: 20Hz 20KHz (± 1dB)
• Dynamic range: 100dB
• Maximum input: +20dB
• Total harmonic distortion: 0.01 @ 1kHz
• Phase deviation: 2° @ 100Hz; 5° @ 50Hz
• Input impedance: 40k Ohms, unbalanced
• Output impedance: 2.8k Ohms, balanced
• Transformer: Custom design
• Input pad: -10dB
• Auto Merge: Sums left & right sources to mono at XLR
• Ground lift: Disconnects pin-1 at 1/4" TRS outputs
• XLR configuration: AES standard (pin-2 hot)
• Input connector: 3.5mm (1/8") integrated 1.5m (5') cable
• Output connectors: 1/4" TRS stereo / XLR-M mono merge
• Construction: 14 gauge steel chassis & outer shell
• Finish: Baked enamel
• Size: (L x W x D) 4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
• Weight: 0.55 lbs (250 grams)
• Shipping Size: W x H x D: 102 x 76 x 165mm (4" x 3" x 6.5")
• Shipping Weight: 0.8 lbs (365 grams)
• Power: Passive, no power required
• Warranty: Radial 3-year, transferable