Yamaha MS101-4 4" Monitor Speaker - Secondhand

Full Description

Monitoring with a difference

Get a super-clean sound that has a super-high output. This is ensured by the MS101-4's 30W power rating driving its 4" woofer. All within its highly optimized enclosure.

There's a wide range of connectivity, too. A combi input on the front allows the connection of both jack and XLR leads. While the rear has two different size jack inputs and a line out for linking with other units.

Compact and lightweight

The MS101-4 has been redesigned to be more compact and lighter than previous models. So if you need monitoring, and you travel a lot, you'll find the MS101-4 to be a solid option.

By putting the bass reflex on the rear, Yamaha's been able to save on even more space. And this is all while having an input, volume controls, and tone-shaping on its front for quick access. This means you can get great sound wherever you are.

Use anywhere

You can place the MS101-4 on your desktop. But there's also a whole range of other options for setup.

On the bottom, there's a 3/8-16 threaded female mounting, allowing you to attach the MS101-4 to a mic stand. You'll also find two M5 female mountings. This allows you to attach a range of separately available adapters for wall, ceiling, stand mounting.

Features

• 30W power rating provides sound with power and clarity
• Compact enclosure designed for portable use
• Simple enough to get started, but in-depth enough for pro use
• Both line and mic inputs available on front and back
• Flexible design for use in a variety of situations
• Wall-mountable, ceiling-mountable, mic-stand-mountable, speaker-stand-mountable
• Re-designed enclosure, with bass port on rear, has a lower profile
• Controls on front for power, volume and tone
• Easy-to-remove power cord makes set up and set down super quick
• Robust design with a sturdy metal grille on the front

Specifications

• System Type: Full range Powered Speaker, Bass-reflex Type
• Frequency Range (-10dB): 77Hz–20kHz
• Measured Maximum SPL (Peak) / Pink noise @1m: 115 dB SPL
• LF:
  • Diameter: 4" (10cm) Cone
  • Voice coil: 1.0"
  • Magnet: Ferrite
• Dimensions (WxHxD, without rubber feet): 142 x 196 x 187 mm
• Net Weight: 2.1 kg
• Screw threads (bottom):
  • 2 x M5 depth 11mm pitch 60mm (for 2 x M5 x 6~10mm screws)
  • 1 x 3/8" depth 12mm (for 1 x 3/8" x 9~11mm screw)
• Amplifier Type: Class-D
• Power Rating *1:
  • Dynamic: 30W
  • Continuous: 20W
• Cooling: Natural cooling (no fan)
• Connectors:
  • Input: INPUT (Front): Combo, LINE INPUT 1: Stereo mini, LINE INPUT 2: Phone(TRS)
  • Output: Phone (TRS) x1
  • Power: IEC AC inlet x1
• Input Impedance: INPUT (Front): LINE: 5.4 kΩ, MIC: 5.4 kΩ, LINE INPUT 1, 2: 10 kΩ
• Input Sensitivity (VOLUME: Maximum): INPUT (Front): LINE: -10 dBu, MIC: -40 dBu, LINE INPUT 1, 2: -10 dBu
• Nominal Input Level (VOLUME: Center): INPUT (Front): LINE: +5 dBu, MIC: -25 dBu, LINE INPUT 1, 2: +5 dBu
• Maximum Input Level: INPUT (Front): LINE: +20 dBu, MIC: -10 dBu, LINE INPUT 1, 2: +20 dBu
• Controls: VOLUME x1, LOW CONTROL x1, HIGH CONTROL x1, POWER
• Indicators (LED): POWER (Green)
• Idle Power Consumption: 3 W
• 1/8 Power Consumption: 10 W
• Power Requirements: 100V - 240V, 50/60Hz