Tascam SS-R250N - Networkable Solid-State Audio Recorder - Secondhand

Full Description

Dynamic solid-stare recordings

Solid state recording devices are the go-to modern method of audio recording, their digital versatility backed up by physical storage makes them incredibly useful and failsafe. Tascam bring you the SSR250N, a solid state recording and playback device with LAN network connection capabilities. Featuring two SD card slots and a USB port, the SSR250N can host a range of SD card types with storage capacities of up to 128GB, and a USB drive with up to 64GB of memory. Supporting high resolution recording and playback at 96KHz/24bit audio quality, the SSR250N also features a built in sample rate converter for its inputs and outputs.

An integrated LAN network hub allows you to upload recorded files to external sources on the connected server with its file transfer protocol (FTP) host function, as well as download audio files from the server too. The LAN capability provides the ability to set time synchronisation via SNTP hosting and event lists for recording, playback, downloading means that the SSR250N can pre-set to run autonomously in advance. Control the SSR250N with the RC SS150 remote control or install the IOS/Android control app to command the recording device from a distance.

High-end sound quality and recording

A range of recording modes and functions allow you to utilise the multiple storage inputs in ways that suit your equipment and circumstances. The dual SD card and USB inputs can be used to create backups or used in succession when recording. Backup mode stores the audio on both selected media simultaneously, this prevents loss of your recording in case of problems like corruption or recording medium issues, and an automatic closing file closing feature saves and closes recording files every few seconds to safeguard against power loss and other disruption.

To maximise the length of your recording, the Relay function allows you to record on one storage device to the next sequentially, so you don't need to worry about stopping recording and switching to an empty storage device, perfect for any extended recording requirements. To aid your recording process, the SSR250N is equipped with many more features such as a compressor and limiter, as well as automatic input level control and recording automation. For inputs the SSR250N has analog XLR and RCA connectors, with the XLR having 48v phantom power capability, as well as digital AES/EBU and a SPDIF coaxial input.

Wide range of playback controls

Extensive playback controls and modes, and assistance allow you to get the most out of your recordings or uploaded audio. Playing audio on the SSR250N is straight forward and user friendly, auto cue locates the first sound in a track when the device is in playback standby, incremental play lets you to skip through tracks effortlessly by pressing play, and you can adjust speed and key with a pitch control. Different playback modes such as program, random, and single give you the ability to play your audio in any order. An "end of message" (EOM) will let you know when your track is about to finish. Outputs for the SSR250N mirror the inputs, with both analog XLR and RCA as well as digital AES/EBU and SPDIF outputs.

A versatile machine

in addition to its recording, playback, and network connectivity capabilities. The SSR250N has a sample rate converter for integrating with different equipment, you can connect a range of compatible remote controls, and you can connect another unit and use link playback to operate them simultaneously. You can even install an optional IF-DA2 two channel Dante Network Interface Card, this integrates the Tascam SSR250N with other Dante compatible devices, employing pristine digital connection via ethernet cables. Despite the power and useful range of features of the SSR250N, it only takes up one unit of your rack space, and its rugged outer construction keeps it safe from damage and ensures its long service life. The Tascam SSR250N solid state recorder is essential for any lecture hall, house of worship, concert hall, club or any other venue with extensive recording requirements.

Features

• Solid state recorder built for professional recording and playback
• Supports high resolution 96KHz/24bit audio and features a sample rate converter
• Two SD card slots and a USB port give you ultimate hard disk storage options
• Relay mode allows you to record onto two SD cards sequentially for extra recording time
• Backup mode lets you record onto two SD cards simultaneously to negate errors
• LAN network allows you to upload and download files as well as configure the recorder
• Extensive recording and playback features and functions make it a user-friendly device
• Both digital and analog inputs and outputs as well as 48v phantom power XLR
• Can be commanded via a range of wireless remote controls including an IOS/Android App
• Optional IF-DA2 two channel Dante Network Interface compatibility

Specifications

General

• Recording media:
  • SD cards (512 MB – 2 GB)
  • SDHC cards (4–32 GB)
  • SDXC cards (64–128 GB)
  • USB flash drives (512 MB – 64 GB)
• Recording and playback file formats:
  • MP3: 44.1/48 kHz, 64/128/192/256/320 Kbit/s
  • WAV: 44.1/48/96 kHz, 16/24 bits
• Number of channels:
  • 2 channels (stereo)
  • 1 channel (mono)

Analog audio inputs and outputs

• Analog input (unbalanced): RCA pin jacks
• Rated input level: –10 dBV (0.316 Vrms)
• Maximum input level: +6 dBV (2.0 Vrms)
• Input impedance: 10 kΩ or higher Analog input (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
• When used as line input:
  • Nominal input level:
    • +4 dBu (1.23 Vrms, when Ref.Level set to other than −9 dBFS)
    • +6 dBu (1.55 Vrms, when Ref. Level set to −9 dBFS)
  • Maximum input level (switchable):
    • +15 dBu (4.36 Vrms, Ref. Level: −9 dBFS)
    • +18 dBu (6.16 Vrms, Ref. Level: −14 dBFS)
    • +20 dBu (7.75 Vrms, Ref. Level: −16 dBFS)
    • +22 dBu (9.76 Vrms, Ref. Level: −18 dBFS)
    • +24 dBu (12.28 Vrms, Ref. Level: −20 dBFS)
  • Input impedance: 10 kΩ or higher
• When used as mic input (phantom power supported):
  • Maximum input level: +4 dBu (1.23 Vrms)
  • Minimum input level: –70 dBu (245 μVrms) or higher
  • Input impedance: 2.2 kΩ or higher
• Analog output (unbalanced): RCA pin jacks
  • Rated output level: –10 dBV (0.316 Vrms)
  • Maximum output level: +6 dBV (2.0 Vrms)
  • Output impedance: 200 Ω
• Analog output (balanced): XLR-3-32 (1: GND, 2: HOT, 3: COLD)
  • Nominal output level:
    • +4 dBu (1.23 Vrms, when Ref.Level set to other than −9 dBFS)
    • +6 dBu (1.55 Vrms, when Ref. Level set to −9 dBFS)
  • Maximum output level (switchable):
    • +15 dBu (4.36 Vrms, Ref.Level: −9 dBFS)
    • +18 dBu (6.16 Vrms, Ref.Level: −14 dBFS)
    • +20 dBu (7.75 Vrms, Ref.Level: −16 dBFS)
    • +22 dBu (9.76 Vrms, Ref. Level: −18 dBFS)
    • +24 dBu (12.28 Vrms, Ref.Level: −20 dBFS)
  • Output impedance: 200 Ω
• Phones output: 6.3-mm standard stereo jack
• Maximum output power: 45 mW + 45 mW or higher (THD+N 0.1 or less, into 32 Ω load)

Digital audio inputs and outputs

• Digital input (AES/EBU): XLR-3-31
  • Input impedance: 110 Ω
  • Format: AES3-2003 / IEC60958-4 (AES/EBU)
  • Supported sampling frequencies: 44.1 kHz, 48 kHz, 96 kHz (When SRC ON, 32–192 kHz can be received)
• Digital input (SPDIF): RCA pin jack
  • Format: IEC60958-3
  • Supported sampling frequencies: 44.1 kHz, 48 kHz, 96 kHz (When SRC ON, 32–192 kHz can be received)
• Digital output (AES/EBU): XLR-3-32
  • Output impedance: 110 Ω
  • Format: AES3-2003 / IEC60958-4 (AES/EBU)
  • Supported sampling frequencies: 44.1 kHz, 48 kHz, 96 kHz
• Digital output (SPDIF): RCA pin jack
  • Format: IEC60958-3 (SPDIF)

Other inputs and outputs

• Remote jack: 2.5-mm TRS jack (for Tascam RC-3F or RC-20, sold separately)
• USB port: 4-pin USB, A-type
  • Protocol: USB 2.0 High Speed (480 Mbit/s)
• Serial port (RS-232C): D-sub 9-pin
• Parallel port: D-sub 25-pin
  • Maximum input voltage: +5.5 V
  • High-level minimum input voltage: +2.31 V
  • Low-level maximum input voltage: +0.99 V
  • Output format: Open collector (10 Ω output impedance, 20 V withstand voltage, 35 mA maximum)
  • Low-level maximum output voltage: 0.5 V
  • 5V power supply maximum supplied current: 100 mA
• Network connector (Ethernet): RJ45
  • Compatible standard: 100BASE-TX

Audio performance

• Frequency response (LINE IN or MIC IN to LINE OUT):
  • 20 Hz – 20 kHz, ±0.5 dB (Fs = 44.1/48 kHz, JEITA)
  • 20 Hz – 40 kHz, +0.5/-3 dB (Fs = 96 kHz, JEITA)
• Distortion: 0.002 or less (LINE IN to LINE OUT, Ref. Level: −16 dBFS, Fs = 44.1/48/96 kHz, JEITA)
• S/N ratio: 106 dB or more (LINE IN to LINE OUT, Fs = 44.1/48/96 kHz, JEITA)
• Dynamic range: 106 dB or more (LINE IN to LINE OUT, Fs = 44.1/48/96 kHz, JEITA)
• Crosstalk: 100 dB or more (LINE IN to LINE OUT, Fs = 44.1/48/96 kHz, JEITA)
• Equivalent input noise (EIN): −125 dBu or less (150 Ω, 20 kHz LPF, A-weighted)

Power supply and other specifications

• Mains power: AC 100–240 V, 50-60 Hz
• Permissible operating temperature range: 5–35 °C
• Power consumption: 20 W
• Dimensions (W × H × D): 483 mm × 45 mm × 301 mm
• Weight: 2.9 kg
• Product code: SS-R250N