This product is currently unavailable for delivery to your country
Key Features
- Powerful 32-channel reference-quality D/A converter
- Stream up to 32 channels of 192kHz audio to an AVB network
- Ultra-stable clocking thanks to SteadyClock/femtosecond technology
- Ensure perfect synchronization via SyncCheck
RME M32 DA Pro 32-Channel D/A Converter Overview
Exceptional quality conversion. If you value pristine sound then you need the RME M32 DA Pro 32-Channel D/A Converter in your studio and live set-up. Made from only the finest components and detailed analog circuitry, the DA Pro guarantees stable clocking at all times. It enables you to sync every source within your AVB network at 192kHz sample rates.
Make the most of the complimentary AVDECC controller software, this makes demanding tasks such as the management of all your devices in your network feel like an effortless endeavour. This will free up your time, allowing you to focus on more important tasks!
The DA Pro has been designed to be compatible with a wide range of hardware, all of which can be easily labelled thanks to the handy ability to customise each channel. For maximum reliability, take advantage of the redundant power supplies to ensure you'll be able to work in any environment that comes your way!
Product Ref: 171311
Full Description
View Full DescriptionOptimised performance
Two major features that make the DA Pro great is its incredible signal-to-noise ration of 120dBA and miniscule THD values. Thanks to this, you'll notice that each and every recording sounds wholly natural with absolutely zero noise and distortion present. The inclusion of internal filters based on the iconic ADI-2 Pro FS reference converters are also perfect for ensuring a linear frequency response at all times.
Incredible quality
The DA Pro features the exact SteadyClock FS circuit that exists in RME's industry-leading ADI-2 Pro AD/DA converter. Although its predecessor was impressive, it has nothing on this interface. Thanks to an upgraded analog PLL circuit, the level of self-jitter that the DA Pro offers can normally only be found in master quartz clock mode. The all new design means that jitter is as low as a femtosecond. That's one quadrillionth of a second! Impressive right?
Make your life easier
The DA Pro features not one but two MADI I/Os. Each one comes complete with its own individual signal routing. That may sound great but it gets better! The inclusion of an in-built AVB interfaced configured to IEEE 802.1 and 1722.1 open network standards allow you to project 32 audio channels at 192kHz using a single readily available ethernet cable. You'll also be free to manipulate the DA Pro with a variety of third party controllers from other manufacturers. This allows seamless integration into most set-ups.
Great for multimedia set-ups
If you're someone who finds themselves using lots of analog hardware in their set-up then you'll appreciate the widespread compatibility that the DA Pro provides. Every channel can be operated at different line-levels whilst still guaranteeing maximum resolution. Not only can you work in +19dBu and +13dBu, the DA Pro is capable of operating on the SMPTE recommendation of +24dBu. This makes it an excellent choice for film and television.
Features
- Operate each individual channel at personal line levels
- Keep an eye on your levels and parameters with handy high-resolution display
- Personalised labelling provides detailed overview of analog channel assignments
- Dim illuminated elements in dark mode
- Consistent and reliable at all times thanks to redundant power supplies
Specifications
- Resolution: 24 bit
- Output level switchable per channel: +24 dBu, +19 dBu, +13 dBu @ 0 dBFS
- Outputs: DC coupled, fully symmetrical signal path ("truly balanced")
- Output impedance: 200 Ohm balanced, 100 Ohm unbalanced
- Signal to Noise ratio (SNR) @ +13/+19/+24: 116 dB RMS unweighted, 119 dBA
- Frequency response @ 44.1 kHz: -0.1 dB: 0 Hz – 22 kHz
- THD @ -1 dBFS: Less than -109 dB, Less than 0.00035 percent
- THD+N @ -1 dBFS: Less than -107 dB, Less than 0.00043 percent
- Channel separation: Greater 110 dB
- Product Code: RME-M32-DA-PRO
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all