Product Ref: 115991
Not only have the BX5-D3’s been designed with military grade materials, but also with military precision. The 5” Kevlar woofer is the ideal material to produce high quality sound, being both rigid enough to project low end frequencies and light enough to give clear transient responses. The 1” dome tweeter is also made of silk, for an incredibly fast response, meaning the high frequencies are reproduced with clear definition, allowing you to hear every part of your mix.
The speaker casing has been carefully designed for its purpose. The tweeter sits within a custom waveguide, allowing for a controlled dispersion of sound, instead of just pockets of high end like other speakers. The rear-mounted bass port is also designed to give a defined bass response and extension. This means the BX5-D3 can make a truly full 3D soundscape.
The BX5-D3’s have been developed to give tremendous sound reproduction in any environment. If used in a small room, bass frequencies can build up corners and bounce off surfaces. This gives the false impression of too much or too little bass in your mix, meaning it will not translate to other systems or environments well. The Acoustic Space Control feature offers 3 types of low frequency attenuation (56Hz, 80Hz, 100Hz), allowing you to get a clear representation of low end clarity in your mix.
A blue LED on the front of the monitors is designed to find the best listening position as easy as possible, the blue LED will shine at it’s brightest when you have found the sweet spot. This allows for uncompromised accuracy and critical evaluation, to truly get the best out of your production.
Both the tweeter and woofer in the BX5-D3s are independently powered by their own Class A/B internal amplifiers. Each amplifier has been tailored to the frequency range it handles, whilst still complimenting the other amplifier. With a finely-tuned crossover point, this guarantees each driver handles the frequencies it is meant to, making for powerful and cohesive sound.
These are M-Audio’s most efficient monitors to date. Boasting a collective 100 watts of power, headroom is no problem for the D3’s. The higher headroom allows for the volume to be increased, without any distortion of the sound. The additional power not only means you can listen to your mixes at a slightly louder level for referencing (we do not recommend listening at a high level for long time periods), but they are also great to use as general media speakers.
AcouFoam Universal Studio Monitor Isolation Pads by Gear4music, are designed to effectively isolate your studio monitor from its surrounding environment but can also have potential other applications in a studio and home audio setting. Using a specially chosen, load bearing and absorptive foam, AcouFoam provides safe mounting and also minimises compression over time. Decoupling your studio monitor using a layer of foam means you can reduce vibrations and lessen the effect of colouring on sound and losing sound towards the floor. As well as elevating your monitors, the included angled pad means you can potentially position your monitor in any of three ways. The freedom to experiment with positioning means you can achieve optimal sound reproduction based on your acoustics and seating position.
The XLR (M) - Jack Amp/Mixer Cable is a high quality, noiseless and oxygen free 3 metre male XLR to straight jack cable that also incorporates a strain relief spring system jack plug.
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.