Doepfer A-199 Spring Reverb and Wasp Filter System, Euro Plug

Full Description

Doepfer A-199 Spring Reverb

Classic Spring Reverb

The Doepfer A-199 is a spring reverb module with a powerful three-spring tank that provides a beautiful reverberation effect. The tank for the A-199 uses three springs with variations in their properties that deliver a rich, dense reverb covering a wide range of frequencies. These springs are attached to high quality input and output transducers. Each transducer consists of a coil centred around a magnetic lamination and small cylindrical magnets centred in the air gap of the lamination.

Doepfer A-124 Wasp Filter

Unique Filter Circuitry

The Doepfer A-124 Wasp Filter utilises the quirky circuitry from the late '70s EDP (Electronic Dream Plant) Wasp synthesizer. The original Wasp VCF was CMOS-based, allowing you to achieve unique and powerful post-filter distortion. The sound is distinctive, and incredibly versatile. The circuitry basically "abuses" digital inverters as analog op-amps giving you access to these dirty sounds and effects commonly associated with the Wasp filter.

Doepfer A-145 Low Frequency Oscillator

Perfect For Sound Design

The Doepfer A-145 Low Frequency Oscillator is an LFO module with five available waveform options. You can modulate any number of modules using inverted sawtooth, sawtooth, sine, square wave, and triangle waveforms.

The A-145 is also equipped with a three-way switch, enabling you to select between three different frequency ranges. You can also synchronise the LFO signal using the Reset input next to the toggle switch. The Doepfer A-145 is an incredibly flexible and powerful LFO with a user-friendly and intuitive interface.

Erica Synths Pico Output

Monitor Your System

The Erica Synths Pico Output allows you to monitor your modular system through headphones, whilst also providing you with standardized connections for mixing desks. Equipped with a 3.5mm stereo output jack, you can hook up your Pico system to practically any speaker system or line input.

The Pico Output features signal attenuation and boosting up to gain 2, the ability to invert signals, and offset signals by +/-5V. The Pico Output is an ideal addition to your modular system for providing effective interfacing and utility.

Erica Synths Pico Input

Perfect For Interfacing

The Erica Synths Pico Input is the perfect module for interfacing your Pico system with external synthesizers and other devices. Equipped with independent left and right inputs (with the left input also being a 3.5mm stereo input itself), the Pico Input gives you full stereo interfacing complete with independent gain adjustment controls for each of the L and R channels.

The Pico Input boosts external signals to the modular synth signal level, and is configurable between +20dB and +40dB.

Tiptop Audio Happy Ending Kit

Modular Housing with Integrated Power Supply

The Tiptop Audio Happy Ending Kit includes everything you need to start setting up your modular gear in a Eurorack system. The kit features a Z-Rails set, including the screws needed to attach them to the Z-Ears, a uZeus 4HP PSU with two flying bus boards, and a 1000mA power wall adapter.

The Z-Rails are built to precise standards, preventing the issues of loose mounting hardware and incorrect spacing. Attaching the rails to the Z-Ears allows you to mount your Tiptop Audio modules into a unit that can be further mounted into a case, or used as a lightweight and portable desktop setup.

The Zeus power supply is a dedicated Eurorack format synthesizer PSU, and is one of the smallest and most powerful available for its size. The uZeus utilises flying ribbon bus boards, which allow you to just plug in your modules and play.

Features

Doepfer A-199 Spring Reverb

• Powerful and versatile reverb effect with spring reverb tank
• 3-spring system ensures rich, dense reverberation
• Reverb signal can be fed back into the input with feedback control
• Springs can self-oscillate similar to a filter
• Emphasis control enables adjustment and accentuation of mids

Doepfer A-1356 Low Frequency Oscillator

• LFO produces cyclical CVs in very wide range of frequencies
• Five available waveform choices with independent outputs
• Sawtooth, inverted sawtooth, triangle, sine and square waves
• Reset input allows precise LFO synchronisation
• Three-way frequency range switch spans minutes to 4-5kHz

Doepfer A-124 Wasp Filter SE, Black/Yellow

• 12dB multi-mode filter with unique classic circuitry
• Based on the 70s EDP wasp synth design
• Abuses digital inverters as analog op-amps for dirty sounds
• Independent band-pass and low/high-pass outputs
• Versatile and powerful controls for sound shaping

Erica Synths Pico Input

• External device input module that boosts incoming signal
• +20dB/+40dB gain boost configurable with jumpers
• 3.5mm stereo jack on left channel for versatile connections
• Simplistic and intuitive interface for easy and effective use
• Ultra-compact 3HP, packed with powerful capabilities

Erica Synths Pico Output

• Output module for headphones monitoring and external interfacing
• Headphone output equipped with hi-fi headphone amplifier
• Signal attenuation, boosting, inverting and +/-5V offset
• Simplistic and intuitive interface for easy and effective use
• Ultra-compact 3HP, packed with powerful capabilities

Tiptop Audio Happy Ending Kit - UK – Silver

• Everything you need to start a Eurorack modular system
• Precision-crafted Z-rails provides secure module mounting
• Custom-made Z-ears for mounting in 3U of rack space
• Compact and powerful uZeus PSU for powering your modules
• Two flying bus boards with keyed connectors prevent damage