The Doepfer A-160 Clock/Trigger Divider is designed to divide clock/gate/trigger signals and to be a source of lower frequencies. The A-160 is perfect for rhythmic uses, with a trigger input that allows click signals from a variety of sources. The A-160's outputs provide you with access to the sub-divided clock signals, from half of the clock frequency all the way down to 1/64. The lowest output signal is 0V, whilst this highest is approximately +10V. The module is also equipped with a reset input, enabling you to set all of the outputs to 0 when a reset signal is sensed by the A-160. The outputs remain at 0 until the reset voltage disappears. The A-160 is perfect for combining with Doepfer's Clock Sequencer to create stepped sequences with a length from 1 to 8 events.
Product Ref: 96798