Key Features
- Power amplifier for passive speakers
- 2 x 750 W output at 4 ohms or 2 x 500 W output at 8 ohms
- Built-in protection circuits and LED indicators
- Perfect for installed applications and portable rigs
W Audio XTR 1500 Power Amplifier Overview
The W Audio XTR 1500 power amplifier is ideally suited for medium-sized performance venues. The XTR 1500 power amp provides two channels with 750 watts at 4 ohms or 500 watts at 8 ohms. Compatible with almost every type of passive speaker, the W Audio amplifier offers speakON and binding post output connectors.
With a lightweight chassis that occupies 2U of rack space, the W Audio power amps can integrated within your existing setup and installed within traditional 19'' rack units. Conveniently monitor the status of the signal thanks to the front panel LED indicators. With high headroom and low noise distortion, the W Audio XTR 1500 enables you to perform all night long.
Product Ref: 122785
Full Description
View Full DescriptionDesigned for live performance venues
Power your speakers without worrying about damaging your speakers. The XTR 1500 power amp is equipped with a range of built-in protection circuitry. From thermal and short circuit to DC power and overload.
Rack-mountable, the 2U chassis can be installed within any standard 19'' rack unit. Performance venues are often very hot due to heat emitted by equipment and radiated by people. Built-in low noise fans ensure that the amplifier remains cool and allow you to perform all night long.
Features
- Up to 2 x 750 W continuous output at 4 ohms
- 500 W output at 8 ohms
- Multiple built-in protection circuitry to avoid overload
- Ground lift switch for reducing noise
- Convenient LED indicators and controls
- 2U rack-mountable chassis for convenient storage
Specifications
- Stereo Power Output:
- 2 x 750 W RMS at 4 Ohms
- 2 x 500 W RMS at 8 Ohms
- Bridged Mono Power Output: 1000 W RMS at 8 Ohms
- Frequency Response: 20 Hz - 20 kHz
- Input Sensitivity: 0.775 V / 1 V / 1.44 V
- LED Indicators:
- 2 x Protect
- 2 x Clip
- Input Connectors:
- 2 x Phono
- 2 x 1/4'' Jacks
- Output Connectors:
- 2 x SpeakON
- 2 x Binding Posts (Pairs)
- 2 x 1/4'' Jacks
- Protection Circuits:
- Thermal
- Short Circuit
- Overload
- DC Fault
- AC Power Supply Fuse
- Power Supply: 240 V, 50 Hz
- Dimensions: 87 mm x 484 mm x 297 mm
- Weight: 10.75 kg
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all