Full Description
View Full Description
Total system control
Best-in-class performance guaranteed. Turbosound have teamed up with Klark Teknik to deliver a pro-grade floor monitor with intelligent system control. Alongside 1100W of efficient Class-D power, the TFX122M-AN gets its superior performance from a powerful DSP. This sophisticated processing technology provides you with dynamic equalisation and transparent limiting, giving your sound incredible impact and definition, even at high output levels.
Connection made easy
Simple to setup, with dramatic results. The TFX122M-AN allows you to utilise ULTRANET connectivity to transmit audio and control data with ease. Up to sixteen independent channels of 24-bit data can be transmitted through a single CAT5 cable. This makes your monitor ideal for connecting to other ULTRANET devices, such as stageboxes, mixers, monitoring systems, loudspeakers, and more.
Live sound with more to offer
Turbosound pride themselves on building some of the most revered loudspeakers in the world, and the TFX122M-AN is no exception. This powerful floor monitor boasts incredibly powerful and reliable custom-engineered transducers, including a high-excursion 12'' LF driver, and a titanium dome 1'' HF compression driver. The 12'' driver features a low-mass voice coil, dramatically improving its transient response, whilst the tweeter is mounted on a low-distortion waveguide for optimal sound dispersion. With such phenomenal transducer designs, you can be sure that you hear your sound exactly as it was intended.
Intuitive, powerful, and easy to use
Live sound doesn’t have to be difficult. And with the TFX122M-AN, you can take complete control with a single rotary controller and LCD display. From this simple back panel, you can access position compensation, equalisation, sub integration, and signal routing. Plus, with a dedicated XLR output built into the monitor, you can daisy-chain additional active loudspeakers or subwoofers. Control your monitor from anywhere in the room with the integrated USB port. You have full access to Turbosound's free remote-control software, alongside updates for your DSP firmware.
Built to perform
Great sound meets great performance. The TFX122M-AN has been designed to withstand the rigours of daily use. The cabinet is constructed from 15mm plywood with fibre-glass reinforced composite end cheeks, and features a powder-coated perforated steel mesh grille for ultimate speaker protection. Mount your TFX122M-AN with ease thanks to the integrated 35mm pole socket. When you have the monitor set on the floor, its low-profile design ensures that your performance is still visible to your audience.
Features
- Flawless sound onstage from a two-way monitor
- Perfect for portable applications
- Total system control from Klark Teknik Digital Signal Processing
- Easily connect to mixers and other sources via ULTRANET digital audio networking
- Improved low frequency response from a high excursion 12” woofer
- Improved transient response from a low mass voice coil
- Extended high frequency reproduction from a titanium dome 1” compression driver
- Low profile design ensures audiences view of the stage goes unobstructed
- Easy-to-navigate user interface with fully featured LCD display
- Exceptional sound dispersion thanks to a low distortion wave-guide
- Control your monitor from the best seat in the house with PC remote control
- Robust plywood enclosure capable of withstanding knocks and drops
- Scratch and scuff resistant semi matt black paint finish
- Easy to lift and carry thanks to ergonomic handles
- Designed and engineered in the UK
Specifications
- Frequency Response:
- +/-3dB: 75Hz - 18kHz
- -10dB: 68Hz - 20kHz
- Nominal Dispersion: 60° x 40° (H x V) at -6dB points, rotatable
- Maximum SPL: 125dB peak
- Crossover Type: Active
- Transducers:
- LF Driver: 1 x 12'' (311.5mm)
- HF Compression Driver: 1 x 1'' (25.4mm)
- Limiter:
- Amplifier Type: Class-D
- Maximum Output Power: 1100W
- Protection:
- Input/Link Connector:
- 1 x XLR-1/4'' combo
- 1 x XLR
- Sensitivity: +1dBu
- Input Impedance: 40k Ohms balanced
- Maximum Input Level: +12.5dBu
- Ultranet Input/Link: 2 x RJ45
- Mains Supply: Standard IEC receptacle
- DSP Controls: Rotary push-encoder and level control
- Factory EQ Presets:
- Positioning
- Sound Mode
- FBQ
- Display: 128 x 32 backlit LCD, blue
- Delay: 0 - 300ms
- Equalisation:
- High and low shelving EQ
- 2 x parametric EQ
- Limiter: Zero attack input limiter
- Presets: 20 total presets (19 user-definable)
- Crossover: High-pass L-R 24dB/oct
- DSP Protection: Lock-out function for all settings
- Ultranet Digital Network:
- Digital Processing Factory EQ Presets: 24-bit, 44.1/48kHz sample rate
- Signal: 16 Channels
- Latency:
- Cables Required: Shielded CAT5 (max. 246ft/75m recommended length)
- Construction: 15mm (5/8'') birch plywood and polypropylene plastic
- Finish: Semi-matte black paint
- Grille: Powder-coated perforated steel
- Power Consumption: 140W at 1/8 max. power
- Voltage: 220-240V, 50/60Hz
- Fuse: T 4 A H 250V
- Dimensions: 302mm x 452mm x 504mm / 11.9'' x 17.8'' x 19.9'' (H x W x D)
- Net Weight: 16.9kg / 37.2lbs
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.