Sennheiser MZA 900 P In-Line Phantom Power Adaptor, 3.5mm Jack

This product is currently unavailable for delivery to your country

Key Features

  • Converts pre-polarised condenser mics with a 3.5mm jack connector to 3-pin XLR
  • Ideal for use in both wired and wireless applications for maximum functionality
  • Integrated switchable gain and switchable low-frequency roll-off filter
  • Compact and rugged design with a handy belt clip for unobtrusive operation
Questions? Email info@gear4music.com or call 1-888-202-8188

Sennheiser MZA 900 P In-Line Phantom Power Adaptor, 3.5mm Jack Overview

Intelligent and flexible. The Sennheiser MZA 900 P In-Line Phantom Power Adaptor is the ideal solution for connecting your condenser microphone with a 3.5mm jack output connector to an XLR microphone input. The adaptor converts the phantom power fed to it, and supplies it to your microphone so you can get even more functionality out of your mic. You can make full use of your mic in a wired configuration in the studio, as well as wirelessly with a compatible transmitter. An integrated roll-off filter and switchable gain allow additional control over your signal. Plus, with a rugged metal chassis, you can be sure that your MZA 900 P will perform reliably for years to come.


This adaptor is designed to work with the Sennheiser HSP 2 ew, HSP 4 ew, ME 2, ME 3, ME 4, MKE 2 ew Gold, and MKE 40 ew microphones.

Product Ref: 36138

Full Description

View Full Description

In The Box

  • 1 x Sennheiser MZA 900 P In-Line Phantom Power Adaptor, 3.5mm Jack
  • Instructions
  • Warranty Certificate

Features

  • Used for connecting pre-polarised condenser mics to microphone inputs with 10-52V phantom power (P12 - P48)
  • A quick and flexible solution for mics to be used in both wired and wireless applications
  • Can be used with the following Sennheiser microphones:
    • HSP 2 ew
    • HSP4 ew
    • ME 2
    • ME 3
    • ME 4
    • MKE 2 ew Gold
    • MKE 40 ew
  • One and the same microphone can be used together with the adaptor for wired applications, or with a compatible transmitter for wireless use
  • Can also be used as a cable tested for XLR microphone cables
  • Rugged metal chassis
  • 0/-12dB switchable gain
  • 125Hz (-3dB), 12dB/oct switchable roll-off filter
  • Two-colour control LED (phantom power, audio peak)
  • Lockable 3.5mm jack input socket
  • Male 3-pin XLR output socket
  • Fitted with a handy belt clip

Specifications

  • Input Connector: 3.5mm jack
  • Output Connector: XLR-3M
  • Gain: 0/-12dB
  • Output Voltage:
    • P12: 0.6V at 0dB gain
    • P48: 1.8V at 0dB gain
  • Phantom Powering: P12 - P48, 10 - 52V, 2.6 - 2.8mA
  • Frequency Response: 20Hz - 20kHz
  • Output Impedance: 100 Ohms
  • Nominal Impedance: 100 Ohms
  • Minimum Terminating Impedance:
    • At 0dB Gain: 5k Ohms (P12 - P48)
    • At -12dB Gain: 2k Ohms
  • Operating Temperature: -20°C to +60°C
  • Length: 100mm
  • Diameter: 19/22mm
  • Weight: 60g