DISC PreSonus CDL18s Subwoofer

Full Description

Huge sound impact

Massive sound reinforcement for your venue. The integrated 1000-watt Class D power amplifier drives the 18" speaker. The low-frequency transducer has a 4mm coil which provides 7mm of driver travel. The unique ported design maximises efficiency in a compact form.

It articulates the bass frequencies excellently and works wonders when integrated into the CDL system. These systems can be stood on stage or flown using the safe and secure custom rigging system.

Onboard processing helps get the job done

With onboard processing power, the CDLs sub allows you to perfectly tune to the room it's based in. Giving you the best possible sound from this fantastic speaker ecosystem. The robust DSP is coupled with the 1000w Class D Amplifier so you're always getting the most responsive reproduction.

The sub can be hooked up to a standard LAN network and remotely controlled using Worx Control software.

This allows you to control aspects like compression, limiting, and delay remotely using a Mac or Windows computer. These speakers can be managed individually or grouped together so that your tunings are consistent.

Dante compatible

The CDL18s can speak Dante. This means if you're a venue or club with a Dante network installed already. The CDL18s can be slot right in next your existing. Perfect if you're venue is missing that low end robustness but you don't want to replace your entire system.

Being able to talk to other Dante products is an integral part of today's audio reproduction world - the CDL18s delivers.

Features

• Unique porting
• Up to five subs can be flown
• Heavy duty 1000w Class D power amp
• Worx Control software
• Powerful low end reproduction
• Dante compatible
• Six year warrenty

Specifications

Acoustic Performance

• Configuration: Active Subwoofer
• Frequency Response (-3 dB): 42 Hz – 150 Hz (Variable)
• Frequency Response (-10 dB): 36 Hz – 144 Hz
• Maximum Peak SPL: 135 dB
• Crossover Frequency: 90 Hz

Transducer

• LF Transducer: 1x18" Ferrite magnet
• Voice Coil Diameter: 4"

Amplifier

• Type: Class D
• Total Power Output: 2000W Peak, 1000W Program (500W RMS)
• LF Power: 2000W Peak, 1000W Program (500W RMS)
• Cooling: Free air convection
• Rated THD: < 0.05 percent (20 Hz - 20 kHz)
• Dynamic Range: 119 dB (A-weighted)
• Bandwidth: 20 Hz - 20 kHz

Connections and Controls

• Input Channels: 1 Line
• Input Connector Types: (XLR)
• Line Input Impedance: 40 kΩ
• Maximum Input: +4 dBu
• Output Connector: 1 XLR, Direct out
• Controls: Preset Select, Polarity Invert
• Indicators: Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status

DSP

• Effects: Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl
• Bit Depth: 24-bit
• Sample Rate: 48 kHz

Enclosure

• Material: 15 mm Eucalyptus plywood
• Finish: Chemline™ Polyurea
• Grille: Powder-coated steel
• Dimensions (HxWxD): 23.2” x 20.8” x 24” (590 mm x 529 mm x 610 mm)
• Unit Weight: 105 lbs. (47.6 kg)
• Handles: 2 (One on each side)

Safety

• Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
• Transducer Protection: Limiter

Power

• AC Power Input: 90-260V , 50-60 Hz
• AC Power Consumption: (1/8 Power) 4.2 Amps

Suspension Mounting

• Rigging Points: M20 Threaded pole receiver, Integrated rigging (10:1 load)