Full Description
View Full Description
Record-ready drive in seconds
The Tilt drive circuit is voiced around the kind of cranked single-channel amp tones that sit naturally in a mix. It isn't a clone of one particular amplifier; instead, it blends the feel of vintage classics and rare boutique favourites into a balanced sound with firm low mids, smooth response, and plenty of touch sensitivity. Set the Gain for the amount of push you need, match the Treble to your amp, then use Volume to place the sound exactly where it needs to be. The result is immediate, familiar, and easy to trust when you need a finished guitar tone quickly.
Tilt boost for real-world rigs
The boost side is designed around the adjustments guitarists make constantly: level, brightness, and low-end focus. Its Tilt EQ sits roughly neutral at 2 o'clock, then lets you brighten the signal while trimming bass, or thicken the sound while softening top end. That makes it ideal for swapping between guitars, lifting a solo, adding definition to darker rigs, or tightening an already-driven amp without changing every pedal and amp control on your board. It works before the drive, after it, or as a standalone shaping stage.
Tight control, wider gain range
A dedicated three-position Tight switch gives you low-end control independent of the Tilt EQ, so the pedal stays useful across different amps, cabinets, guitars, and stages. Keep things open for bigger chords, trim the bass for fast riffs, or tighten the front end of a high-gain sound. The drive side can move from almost clean to properly distorted, and balancing Gain with Volume opens up a broad spread of rhythm, lead, and pushed-amp textures. It feels responsive under the fingers rather than stiff or over-compressed.
Built for dependable performance
Revv keeps the Tilt practical for pedalboards, sessions, and touring setups. Top-mounted 1/4-inch jacks save space, true bypass keeps your bypassed tone intact, and silent relay switching helps avoid unwanted pops when changing sounds. It runs from a 9-12V centre-negative external supply and draws only 35mA minimum, so it's easy to power from most modern pedalboard supplies. Manufactured in Canada, it also has Revv's rugged build quality and a two-year limited warranty upon registration. From studio boards to touring rigs, it's built to be simple, sturdy, and quick to dial in.
Specifications
- Product Name: Revv Tilt Overdrive/Boost, Shawn Tubbs Signature
- Product Code: RV-TILT
Controls
- Drive Controls: Treble, Bass, Volume, Gain
- Boost Controls: Boost Level, Tilt EQ, 3-position Tight toggle
Connectivity
- Audio I/O: 2 x 1/4" jacks
- Bypass: True bypass with silent relay switching
- Power: 9-12V centre-negative external supply only
- Current Draw: 35mA minimum
Construction
- Design: Analogue
- Dimensions: 2" x 4.27" x 4.37"
- Weight: 0.7lbs
- Manufacture: Made in Canada
- Warranty: 2-year limited warranty upon registration