This product is currently unavailable for delivery to your country
Key Features
- Unlock thick, sludgy distortion
- Gain Boost knob offers superior sonic control
- Bottom control lets you optimise for lower frequencies, ideal for 7+ string guitars
- Lightweight, super-portable plastic enclosure with bright LED for dark stages
Behringer HD300 Heavy Metal Distortion Effects Pedal Overview
The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. There's serious sustain on offer, giving you the ability to get really sludgy, crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated 'Bottom' knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier, go with the HD300.
Product Ref: 24418
Full Description
View Full DescriptionHeavy Low-Ends & Prolonged Sustain
The Behringer HD300 Heavy Metal Distortion Effects Pedal is something of an odd beast in that it has no clipping section, all the distortion comes from a two-stage distortion circuit. Its heavy sound is all thanks to ingenious design features in place of a traditional clipping stage. The capacitors at the input and output of the transistor stage are not polarised enough to function properly with the input/output AC signal so this will likely add distortion, along with the emitter follower at the output of the stage due to the high level of the signal and its own slight asymmetrical bias. This is on top of the fact that this entire section itself adds some asymmetric distortion thanks to using both PNP and NPN transistors. All these factors combine to generate crossover distortion and give the HD300 its characteristic sound and distorted tones.
Features
- Pushes distortion to the maximum with crushing, bottom-heavy effects for modern metal & hard rock
- Dual distortion with gain boost circuitry for super thick & heavy distortion with brutal low-end punch & endless sustain
- Dedicated gain boost, distortion, tone, bottom & level controls
- Status LED for effect on/off & battery check
- Operates on 9-volt battery or the Behringer PSU-SB 9V DC power supply (sold separately)
- Electronic on/off switch for highest signal integrity in bypass mode
Specifications
- Input
- Connector: 1/4'' TS
- Impedance: 500kΩ
- Output
- Connector: 1/4'' TS
- Impedance: 1kΩ
- Power Supply
- USA/Canada: 120V, 60Hz
- China/Korea: 220V, 50Hz
- UK/Australia: 240V, 50Hz
- Europe: 230V, 50Hz
- Japan: 100V, 50/60Hz
- Power Connector: 2 mm DC Jack, Negative Centre
- Battery: 9V Type 6LR61
- Power Consumption: 30 mA
- Weight: 0.33 kg
- Dimensions
- Height: 54 mm
- Width: 70 mm
- Depth: 123 mm
| Reviews of our service by customers who bought this item
View all