This product is currently unavailable for delivery to your country
Key Features
- Tama PMD1100M Drum Rack Basic Unit
- 2 x Vertical Pipes and 1 x Horizontal Pipe
- Clamps for Tom Holders
- Joints for Cymbal Holders
- Guide Lines and Memory Stickers for Easy Setup
Questions? Email info@gear4music.com or call 1-888-202-8188
Tama PMD1100M Power Tower Drum Rack Basic Unit Overview
The PMD1100M is the basic unit of Tama's Power Tower rack system, suitable for the front of a single bass drum kit or the right side of a double bass drum kit. It has a 1100mm length horizontal pipe with two clamps for tom holders, and two 850mm vertical pipes with 19.1mm diameter die-cast joints at the top for mounting cymbal holders.
Product Ref: 38123
Full Description
View Full DescriptionEasy and Accurate Setup
The PMD1100M has guide marks on both the horizontal and vertical pipes, to help you set it up easily. The horizontal pipe is curved but has marks that match to marks on the brackets to ensure it is aligned correctly, while the vertical pipes are marked at 50mm intervals so you can set the horizontal pipe to the height you need and be sure of it being perfectly horizontal.
The unit is supplied with a sticker sheet with the numbers 1 - 10 and the letters A - Z, so you can label clamps, brackets, pipes and holders to easily reproduce your setup every time.
Specifications
- 1 x 1100mm Curved Pipe
- 2 x 850mm Straight Pipes with 19.1mm Joint
- 2 x 40mm x 20mm x 450mm Square Pipes
- 2 x Leg Joint Brackets
- 4 x Rubber Feet
- 2 x Cross Joint Brackets
- 2 x Pipe Holders
- 4 x Memory Locks
