Key Features
- Power and performance with 400W peak output
- Accurate sound from a 10" woofer and 1" tweeter combo
- Fine tune your sound with versatile DSP presets
- Plug and play three-channel mixer with wireless Bluetooth streaming
OFFLINE dB Technologies KL 10 10" Active Speaker with Bluetooth Overview
The future of live sound starts here. Get your performance heard with the dB Technologies KL 10 10" Active Speaker. This all-in-one loudspeaker and mixer is the ultimate companion for musicians on the move. Just plug in, play, and enjoy huge sound from 400W onboard power.
That means crystal clear sound, even at the highest volumes. The KL 10 gets its superior audio quality from a 10" woofer, 1" tweeter, and integrated CD horn. You'll hear every detail of your music, from deep bass to clear highs and everything in between.
Achieving great live sound is hard. But it doesn't have to be. The KL 10 lets you setup in seconds with intuitive DSP presets. Tailor your sound at the touch of a button. Difficult setup is a thing of the past. Hit the road with the included soft cover. With the KL 10, you're stage ready from the second you open the box.
Product Ref: 168709
Full Description
View Full DescriptionAs easy as plug and play
Everything you need. All in one place. Alongside high-performance speakers, the KL 10 offers direct connectivity with a built-in three-channel mixer. You have full control of instruments, vocals, and more. Dial your levels with ease thanks to individual volume knobs. Stream music wirelessly with Bluetooth connectivity. Or fine-tune your audio with Line in and Line out EQ switches. All you have to do is bring your talent.
Studio quality. Stage practicality
Superior audio in every setting. The KL 10 utilises Linear Phase FIR Filters for an outstanding performance. The advanced DSP allows the system to deliver coherent, accurate sound, that accurately reproduces frequencies between 55Hz – 18kHz. Enjoy maximum sound dispersion from the integrated CD horn. No matter where you play, the KL 10 is ready for action. Just setup, choose your desired preset, and prepare to be blown away.
Features
- Exceptional performance from an active 2-way speaker design
- Reach huge volumes with 400W power onboard
- Distortion-free sound all the way up to 125dB Max SPL
- Deep bass from a 10” low frequency driver
- Crisp highs from a 1” high frequency driver
- Improved transient response from custom voice coils
- Enhanced projection from an integrated CD horn
- Great sound for everyone thanks to extra wide 90-degree x 60-degree dispersion
- Fine tune your sound in seconds with versatile DSP presets
- Tight, accurate audio reproduction from Linear Phase FIR Filters
- Easy to connect via combo XLR/Jack, Mic/Line in, and XLR (M) out
- Control your levels with dedicated volume control on each channel
- Stream music wirelessly via the integrated Bluetooth receiver
- Protected against peak, RMS, and thermal damage with onboard limiting
- Easy to carry with specially designed handles
- Small and compact, perfect for travelling musicians
- Comes gig ready with an included soft cover
Specifications
- Speaker type: 2-way active
- Frequency response (-10dB): 55Hz – 18kHz
- Max SPL: 125dB
- HF: 1” driver, 1” voice coil, CD
- LF: 10” driver, 2” voice coil
- Dispersion: 90-degrees x 60-degrees
- Crossover frequency: 2000 Hz (24 dB/oct.)
- Amp technology: Class D (LF) + Class AB (HF)
- Power peak (LF + HF): 400W
- Controls: 1 x Volume, 1 x slide switch mic/line
- Indicators: power on/signal/limiter LEDs
- Controller: DSP 20/56 bit
- AD/DA converter: 24 bit/ 48 Hz
- Systems presets: Playback, Flat, Bass Boost, Wedge
- Limiter: Peak, RMS, Thermal
- Advanced DSP function: Linear Phase FIR Filters
- Signal input: 1x Combo(XLR/Jack), Mic/Line, 1xXLR/TRS
- Bluetooth input: 1xBluetooth receiver
- Signal output: 1xXLR Male (LINK/MIX)
- Housing: Polypropylene
- Handles: 3 (2 x side, 1 x top)
- Angle up: Monitor use (40-degrees)
- Pole mount: 36 mm, double positioning
- Dimensions (W x H x D): 310mm x 521mm x 292mm
- Weight: 11.7kg
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.
| Reviews of our service
View all