Key Features
- Aggressive High-Gain Pedal
- Vexter Box of Metal
- Uses 9VDC Battery
- Alike to High-Gain Tube Amplifiers
- Highly-effective Built-in Switchable Gate
DISC Z.Vex Vexter Box of Metal Guitar Pedal Overview
The Vexter Box of Metal by Z.Vex is a destructive high-gain pedal with an extremely effective built-in switchable gate which powerfully reduces noise and unwanted feedback. Its gain and tonal characteristics are somewhat alike to high-gain tube amplifiers that have been the staple of hard rock and metal sounds since the 80's.
On the left is a gate switch which is only effective when the pedal is on (the gate cannot be used separately). On the right, there is a true-bypass switch with an indicator LED to bypass the complete effect. When the gate's LED (on the left side of the pedal) is ON, the gate will be active whenever the pedal is turned on.
Product Ref: 24335
Full Description
View Full DescriptionThe gate is very useful for cleaning up any noise between palm-muted chords and lead phrases, but may be switched off to initiate feedback or to stretch out soloed notes that are fading into noise. When the gate's LED (left side of the pedal) is on, the gate will be active whenever the pedal is turned on. Switching off and on the gate is silent so the gating action of the pedal can instantly be changed during any part of the performance to fluidly integrate soloing and palm-muted chords.
Features/Specifications:
- The Controls:
- Gate: Adjust for your playing style. When completely clockwise, palm-muting will create an audible thump and bumping the strings will open the gate. Turn down to make the gate tighter. Gate is unaffected by other controls.
- Drive: Sets the amount of distortion. The BOM does NOT clean up. This control goes from hard to very hard. It may crackle when turned... this is perfectly normal.
- Treble: Adjust for treble content. Use this in tandem with your amp's presence and treble controls to get the precise top-end texture... the presence control is very important on your amp, if you have one.
- Midrange: Adjust to accentuate or scoop out mids.
- Bass: Sets the bass/sub-bass level.
- Volume: Sets the output volume of the pedal. Note that the LED on the RIGHT is for the BYPASS switch and the LED on the LEFT is for the GATE. The Drive and control is based on the original Super Hard-On gain control, so it may crackle when turned. This is perfectly normal.
- Operation:
Plug your guitar, or any effect's output, into the right hand input jack. Plug the output into an amp or other effect's input. Watch the output volume setting, with the gate turned on, you may not notice just how loud the pedal really is until you start playing! Set the clean sound on your amp for any level of pristine cleanliness to heavy crunch. The BOM should do very well driving any quantity of nominal distortion. The presence control on your amp will have a strong influence on the top-end texture of your BOM.
- Power Consumption:
Uses 1 9V battery (preferably alkaline, but the unit is shipped with a carbon-zinc battery). The low current process of this pedal's circuit will give you a long battery life. Current draw is about 10mA. A DC power jack is provided on the side of the pedal.
| Reviews of our service
View all