The Laney IRT-60H Ironheart Tube Guitar Amp Head is made to bring out the metalhead in you. Its all-valve, UK construction is the very essence of high-gain tone, utilising the classic combination of ECC83 & 6L6 tubes to produce a thunderous distortion sound. If the full force of 60 watts is too much for your bedroom practise session, simply dial down the Watts knob to reduce volume while still running all the valves at full intensity.
The Clean and Rhythm channels share a three-band EQ section, while the Lead channel boasts one of its own. Both EQ sections feature push-pull pots which alter the frequency range of each control. The Ironheart comes with a built-in pre-boost feature, allowing you to push those tubes a little further for extra grit, just like your favourite boost pedal. With global tone and dynamics knobs, as well as that iconic, red Ironheart glow, this IRT-60H is one dynamic amp that's perfect for touring musicians and bedroom warriors alike.
Product Ref: 22053
The Laney Ironheart 60H features global controls to keep your sound cohesive. Affecting all three channels equally, the master dynamics, tone, and reverb controls add a touch of much-needed finesse to even the most brutal metal tones.
The Dynamics knob is a great way to keep your chugs in check, managing the low-end volume boost that can sometimes result from distorted palm-muting for a smoother, more professional result.
The addition of a master Tone knob is perfect for players who use a range of guitars in the same set. Switching from active humbucking pickups to regular single-coils, for example, can result in a drastic change in frequency response. Counteract this in one quick move by adjusting the global Tone to taste.
Laney have included a specially designed and custom tuned reverb in the Ironheart. Use the included footswitch to instantly add atmospheric wash to clean sections, or smooth out those solos. Or turn the dial to full for spaced-out, experimental fun.
Despite its low-wattage, bedroom rehearsal capabilities, the Ironheart was designed with professional, touring musicians in mind. As such, it includes all the additional elements that make an amp perfect for the road.
The Ironheart IRT-60H comes complete with a handy, robust footswitch. This four-button unit allows simple switching between the amp's three channels, as well as instantaneous control of both the on-board reverb and the handy Pre-boost feature. Connecting by 5-pin MIDI DIN cable, the FS4-IRT is as sturdy and simple as footswitches come - perfect for touring life.
A world-class FX Loop allows unlimited integration of pedals for just the right sound, and includes a switch to engage a -10db pad, or bypass the loop entirely.
Recording direct from the head itself is simple, using the built-in XLR D.I. Output. This powerful feature includes the option to switch between a dry DI signal direct from your guitar, or the full amp sound. Unusually, this is tapped AFTER the 6L6 power amp valves to ensure you get the full tube sound to send to your DAW or cabinet simulator. With a dedicated DI Level knob and ground lift switch both neatly placed next to the XLR port itself, this is a tidy and powerful D.I. solution.
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.