Full Description
View Full Description
Wide array of connectivity options
Classically styled with modern convenience, the SubZero Rotary DJ Mixer provides both technical excellence and a traditional mixing experience. Each channel provides you with sweeping tonal control via the two-band equaliser and ALPS master level potentiometer, with the equaliser tuned for both subtle and dramatic frequency changes allowing you to slot tracks together perfectly. On the back of the mixer a Phono sensitivity adjustment dial for each of the phono inputs will ensure your levels remain consistent when swapping inputs and the accompanying Phono/Line switches allow you to accommodate extra line level signals, for a total of eight, if you don’t wish to use vinyl.
By using the pre-level cue button on each channel and the cue controls in the centre of the mixer you’ll be able to monitor and assess your input signals against the master output via headphones. The cue split switch enables you to choose between hearing both master and cue signals through both headphones at once, in stereo, or splitting them between headphone channels with the cue signal in one ear and the master output in the other. With a further Booth output you’ll be able to hear exactly what’s heading to the PA in your monitor speaker system, helping you make those crucial mixing decisions on the fly.
Thanks to record out connections you’ll be able to capture your mix as it happens. Simply connect to the recording device of your choice and the master output will be transmitted for recording. With the microphone input and its dedicated level pot and mute switch you’ll be able to add vocals in to the mix without overpowering the music.
Built to perform
Consistency in both performance and reliability are essential in a professional mixer. The robust build of the Rotary DJ Mixer will ensure peak performance no matter the environment, with trusted components and proven circuit design chosen to deliver predictable high quality and clean signal control. The large LED meters will allow you to see exactly how much headroom you’ve got in the mix, giving you essential feedback as you bring in new audio elements and helping you to craft a rich mix that never loses its impact. The high quality balanced XLR outputs for both master and booth outputs minimize the risk of noise and interference compromising the quality of your audio signal.
Sculpt your sound
The mixer features a fixed frequency three-band master equaliser and isolator. Simple by design this fixed frequency tone control system has been specifically chosen to not only boost but also completely remove low (20 Hz to 300 Hz), mid (300 Hz to 4 kHz), and high (4 kHz to 20 kHz) frequencies as required. This is perfect for adding dynamics to your mixes with filtering, allowing you to generate moments of interest and enhance the impact of musical transitions. The large size of the knobs on the three isolator controls allows for maximum precision in controlling your master output and, when combined with the individual channel equalisers, provides immense yet nuanced control over your sonic palette.
Specifications
- Power:
- Power supply: 100-240V AC, 50/60 Hz
- Power consumption: 10W
- Gain:
- Line 20 dB
- Phono 60-75 dB
- Mic. 44 dB
- Max. output level 22 dBu
- Frequency Response:
- Line: 20 Hz – 20 kHz
- Phono: 40 Hz – 18 kHz
- Mic: 20 Hz – 20 kHz
- Signal to Noise Ratio:
- Line: 85 dB
- Phono: 77 dB
- Mic: 80 dB
- Total Harmonic Distortion:
- Line: Less than 0.03 percent
- Phono: Less than 0.1 percent
- Master Isolator Equaliser Parameters:
- Range: -inf to +9 dB
- Lows: 20 Hz to 300 Hz
- Mids: 300 Hz to 4 kHz
- Highs: 4 kHz to 20 kHz
- Headphones:
- 6.3 mm jack (min. 32 ohm)
- Weight and Size:
- Dimensions (WxDxH): 332 x 250 x 106 mm
- Weight: 4.5kg
The latest in music technology, for modern musicians and producers. SubZero combines innovation and quality, with the determination to help you get the sound you want. From studio and guitars, to powerful PA systems and home audio setups - SubZero is all about cutting-edge audio.
Your order may contain items that use a 240V UK plug or a 220V EU plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection or a 220V circuit, using an EU plug connection. An adapter or transformer may be required for these items to work properly and safely in your country.
Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.