Full Description
View Full Description
Hand-picked stereo pair
This versatile stereo pair consists of two 2011C microphones with clips and windscreens. Hand-selected on their sensitivity (within +/-1.5dB), this matched pair enables you to achieve precise stereo recordings with ease. XY, ORTF, mid-side and spaced-pair - whatever your preferred configuration, the 2011C stereo pair ensures phenomenal results.
Twin-Diaphragm capsule technology
Phenomenal audio performance and world-class innovation. DPA's powerful twin-diaphragm capsule consists of two miniature capsules custom-rebuilt inside the mic into a single-capsule composition. With a larger diaphragm area, the 2011C boasts lower inherent noise and a rapid impulse response. A large frequency bandwidth also helps to achieve a well-balanced, distinctive and accurate recording.
Powerful and compact MMP-C preamplifier
The MMP-C combines an ultra-compact and lightweight design with DPA's legendary sonic performance. Boasting a slightly softer character and a little more low-end body than the other DPA pencil microphone preamplifiers, the MMP-C features a low-cut at 15Hz with a wide dynamic range of 136dB. This handy preamp allows you to get the best out of your DPA 2011C microphone with ease thanks to DPA's intelligent modular system.
Highly-effective cardioid polar pattern
The cardioid polar pattern is perfect for vocal applications - with more sensitivity at the front of the microphone and significantly less at the sides and rear, a cardioid pattern reduces the capture of ambient noise and unwanted sound sources. This powerful pattern is ideal for live performances, be it music or spoken-word. The narrow angle of sensitivity minimizes bleed from other sources, capturing only what you want to be heard. DPA's unique capsule design prevents any colourization of the sound from the sides or rear with outstanding off-axis rejection, creating a perfect and organic sound stage for your performance.
Reviews
"What strikes me first of all is how small the body is and thus placement in tight places is made a lot easier. In my opinion where the 2011C really excels is as a spot mic for prominent cymbals, namely the hi-hat and ride" - Gearslutz
"The DPA 2011C is an excellent performer and excelled in a wide variety of applications. It sits well below the 1k range and you can easily upgrade your setup by buying a higher-end DPA body, or another capsule or two. I experienced it on two separate occasions where I was drawn into the musical performance and forgot the tech—and that is priceless." - Mix Online
"For piano and guitar, they presented a focused portrait of each instrument’s sonic intricacy that was truly satisfying to listen to — again and again." - Everything Audio Network
What's in the box?
- 2 x DPA 2011C Twin Diaphragm Cardioid Microphones with MMP-C Compact Preamplifiers
- 2 x DPA UA0896 Foam Windscreens, 19mm Diameter, 92mm Length
- 2 x DPA UA0639 Microphone Clips
- 1 x DPA Peli Case for 2011 Stereo Pair
Features
- Two handpicked 2011C Twin-Diaphragm Cardioid Microphones selected on sensitivity within +/-1.5dB
- Makes several stereo principles (such as XY and ORTF) quick and easy to achieve
- Rich, distinctive sound from a custom-built Twin-Diaphragm capsule
- Exceptional off-axis sound rejection from a cardioid polar pattern
- Increased directionality from advanced tube interference technology
- Accurate audio capture across an extended frequency response (20Hz – 20kHz)
- Won’t distort when recording loud sound sources thanks to unrivalled 146dB SPL handling capabilities
- On board impedance balancing from a compact preamplifier with active drive
- Upgrade your microphone thanks to an innovative module design
Specifications
- Preamplifier: DPA MMP-C Compact Preamp
- Directional Pattern: Cardioid
- Principle of Operation: Pressure gradient, with interference tube
- Cartridge Type: Pre-polarized condenser, twin-diaphragm capsule
- Frequency Range: 20Hz - 20kHz
- +/-2dB at 30cm: 50Hz - 17kHz with 3dB soft boost at 12kHz
- Sensitivity: 10mV/Pa; -40dB re. 1V/Pa (nominal, +/-2dB at 1kHz)
- Equivalent Noise Level:
- A-Weighted: Typ. 20dB(A) re. 20µPa (max. 23dB(A))
- ITU-R BS.468-4: Typ. 33dB (max. 36dB)
- S/N Ratio: Typ. 74dB(A) (A-weighted, re. 1kHz at 1Pa, 94dB SPL)
- Total Harmonic Distortion:
- Dynamic Range: Typ. 117dB
- Maximum SPL: 146dB peak before clipping
- Output Impedance: 100 Ohms
- Minimum Load Impedance: 2k Ohms
- Cable Drive Capability: 100m / 328ft
- Output Balance Principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio: >50dB
- Power Supply: 48V (+/-4V) phantom power (for full performance)
- Current Consumption: 2.8mA
- Connector: Male 3-pin XLR (pin 1: shield, pin 2: signal + phase, pin 3: - phase)
- Colour: Matte black
- Maximum Output Voltage: >4V RMS
- Polarity: +V at pin 2 for positive sound pressure
- Microphone Diameter: 19mm / 0.75''
- Microphone Length: 92mm / 3.6''
- Weight: 64g / 2.3oz
- Product Code: ST2011C