TC Helicon Ditto Mic Looper

  • Video 1
  • Video 2
  • Video 3

This product is currently unavailable for delivery to your country

  • Up to 5 Minutes Loop Time
  • Unlimited Overdubs, Auto Gain Adjustment
  • Onboard Mic Pre-Amp with Phantom Power
  • LED Play/Record Status Indicators
  • Built-In Phantom Power for Microphones

TC Helicon Ditto Mic Looper


The TC Helicon Ditto Mic Looper is an innovative new pedal which allows you to seamlessly record and loop a microphone input. Whether you want to loop vocals, acoustic guitar, percussion or something else, as long as you can capture it with a microphone the Ditto can loop it. Featuring up to 5 minutes of loop time, on board mic pre-amp with phantom power, LED status indicators, unlimited overdubs and a simple and ergonomic interface the Ditto Mic Looper is the perfect piece of gear for composing and creating unique tracks from just a microphone input.

Product Ref: 53284

View Full Description

Full Description

View Full Description


  • Easy setup with automatic mic input gain. Just plug in and loop.
  • Dedicated Loop and Stop/Clear switches
  • Onboard mic preamp with phantom power & Mic Control
  • Upto 5 minutes of looping time
  • Unlimited overdubs
  • Undo / Redo function
  • Automatic Gain Adjustment
  • Selectable overdub modes
  • Noise-free erase
  • Balanced XLR in- and outputs
  • Connects transparently between your Mic and PA
  • LED-indicator shows Play/Rec status
  • Latest loop and overdubs stored between power-ups
  • Built-in phantom power (24V) for both dynamic and condenser microphones
  • USB connects to VoiceSupport for simple firmware updates
  • Rugged all-metal construction


  • Input Connector: XLR Female (Balanced)
  • Input Impedance: 2.7 k Ohm (Balanced)
  • Maximum Input Level: -1 dBu
  • Input S/N Ratio: 112 dB (A-Weighted)
  • Phantom Power: 32V (Always On)
  • Output Connector: XLR Male (Balanced)
  • Output Impedance: 250 Ohms
  • Maximum Output Level: -1 dBu
  • Dynamic Range: >104 dB
  • Frequency Response: 20 Hz - 20 kHz
  • Additional Connections: USB
  • Enclosure: Two Part Die-Cast Metal
  • Base: Gripping Rubber
  • Height: 5.4" / 140 mm
  • Width: 3.5" / 90 mm
  • Depth: 2.3" / 60 mm
  • Weight: 0.42 Kg
  • Includes: Power Supply, USB Cable and User Guide
Your order may contain items that use a 240V UK plug
Any electrical items in your order may have been designed to work with a 240V circuit, using a United Kingdom G type plug connection. An adapter or transformer may be required for these items to work properly and safely in your country. Some items work with a range of voltages, or have a switchable voltage control built in. Please refer to the specific product details for further information.