Behringer XENYX 1002FX Mixer

Full Description

Studio-Grade XENYX Mic Preamps

The XENYX mic preamps incorporated in the Behringer 1002FX mixer are renowned for their sonic performance, high quality and outstanding clarity. Offering an impressive 130 dB of dynamic range and a bandwidth that ranges from below 10 Hz to above 200 kHz, the XENYX preamps deliver high level outputs with a focus on clarity and power. The XENYX preamps are ideal for studio recording and live purposes, giving you an array of recording possibilities while maintaining the rich sonic qualities required for professional audio.

Sublimely Musical British EQ

British mixing consoles have long been known for their analog warmth and overall quality recordings. Based on these vintage mixing consoles, Behringer have incorporated the same style circuitry on the channel EQ. This results in incredibly warm and detailed audio, delivering rich sonic qualities associated with the old British mixing consoles.

Built-In Digital Multi-FX

Equipped with Behringer's studio-quality 24-bit multi-FX processor, the XENYX 1002FX mixer provides you with 100 mind-blowing digital effect presets such as delay, chorus and reverb. You then have the ability to apply them to any channel, as well as to the monitors and main output. Additionally, the 1002FX allows you to integrate all of your treasured outboard equipment - bypassing the built-in FX processor.

Features

• Premium ultra-low noise, high headroom analog mixer
• 2 state-of-the-art XENYX mic preamps comparable to stand-alone boutique preamps
• Neo-classic ''British'' 3-band EQs for warm and musical sound
• Studio-grade stereo FX processor with 100 presets including reverb,chorus, flanger, delay and pitch shifter and various multi-effects
• FX send control per channel for internal FX processor and/or as external send
• Main mix outputs plus seperate control room, phones and stereo CD/tape outputs
• CD/tape inputs assignable to main mix or control room/phones output
• Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls
• Designed and engineered in Germany

Specifications

• Dimensions: 47mm x 189mm x 220mm (H x W x D)
• Weight: 1.6kg / 3.5lbs

Microphone Inputs

• Input Connectors: XLR, Electronically Balanced, Discrete Input Circuit
• Preamps: XENYX
• Frequency Response:
• Gain Range: +10dB to +60dB
• Maximum Input Level: +12dBu @ +10dB Gain
• Impedance: 2.6k? Balanced
• Signal-to-Noise Ratio: -107dB / -111dB A-Weighted (0dBu In @ +22dB Gain)

Line Input

• Input Connector: 1/4'' TRS, Electronically Balanced
• Impedance:
  • Balanced: 20k?
  • Unbalanced: 10k?
• Gain Range: -10dB to +40dB
• Maximum Input Level: +20dBu @ 0dB Gain

Stereo Inputs

• Connector: 1/4'' TRS, Electronically Balanced
• Impedance:
  • Balanced: 20k?
  • Unbalanced: 10k?
• Maximum Input Level: +22dBu

Equalizer

• EQ Mono Channels:
  • Low: 80Hz / ±15dB
  • Mid: 2.5kHz / ±15dB
  • High: 12kHz / ±15dB

FX Sends

• Connector: 1/4'' TRS, Unbalanced
• Impedance: 12?
• Maximum Output Level: +22dBu

Main Outputs

• Connector: 1/4'' TRS Jack, Unbalanced
• Impedance: 120?
• Maximum Output Level: +22dBu

Control Room Outputs

• Connector: 1/4'' TS Jack, Unbalanced
• Impedance: 120?
• Maximum Output Level: +22dBu

Headphone Output

• Connector: 1/4'' TRS Jack, Unbalanced
• Maximum Output Level: +19dBu/150? (+25dBm)

FX Section

• Converter: 24-Bit Sigma-Delta
• Sampling Rate: 40kHz