Markbass Little Mark 800 Bass Amp Head - B-Stock

£555.00 RRP £579.00 (including VAT @ 20%)

This product is currently not available for purchase

  • Vintage Loudspeaker Emulator
  • Variable Preshape Filter
  • 4-Band EQ
  • Easily Transportable

Markbass Little Mark 800 Bass Amp Head - B-Stock

The Markbass Little Mark 800 Bass Amp Head is an extremely powerful, compact and versatile digital solid state bass amplifier head that produces beautifully warm lows and defined crisp high tones no matter the volume. With an 800 watt output the Little Mark 800 is ideal for a range of applications from small venue gigs to a festival stage and comes complete with all the connections and EQ parameters needed to produce an reliable and fantastic tone no matter the scenario.

Please note, this is a B-Stock item. B-stock items are either ex repair or have previously been returned by another customer. The original boxing and manual may be missing, and there may be some slight signs of usage.
Otherwise, the unit operates as new.

This is a great opportunity to buy a fully functioning product at a discounted price, supplied with a one year warranty.

Software bundled with the original new product may have been registered or may no longer be included.

Product Ref: 88106

View Full Description

Full Description

View Full Description

The Little Mark 800 is packed full of unique and innovative features that demonstrate the high quality and careful designing that goes into every Markbass amplifier such as the jack and XLR input which provides the adaptability to be used with double bass microphones or pickups as well as traditional bass guitars whilst the DI output located on the back of the unit incorporates a pre/post EQ switch providing optimized control over tone prior to being connected to a mixing desk or recording interface.

Integrating both a Vintage Loudspeaker Emulator (VLE) and a Variable Preshape Filter (VPF) you have the capability to vastly manipulate and influence the tone by using the VPF to adjust the frequency curve boosting bass and middle whilst the VLE emulates traditional loudspeaker cabinets producing a whole new array of tonal options.



  • Master Volume
  • Line Out Level
  • Gain: -60 dB to +23 dB range
  • Ground Lift: Switch on rear panel
  • Pre/Post EQ: Switch on rear panel


  • Input: Impedance 500 Kohm, max. voltage 15 Vpp
  • Balanced Input (XLR): Impedance 100 Khom, max. voltage 25 Vpp
  • Effect Return: Impedance 33 Kohm, max. voltage 10 Vpp


  • Low Center Frequency: 40 Hz; level: ±16 dB
  • Low Mid Center Frequency: 360 Hz, level: ±16 dB
  • High Mid Center Frequency: 800 Hz, level: ±16 dB
  • High Center Frequency: 10 kHz, level: ±16 dB
  • VPF (Variable Pre-shape Filter): Center frequency 380 Hz (cut)
  • VLE (Vintage Loudspeaker Emulator): Frequency range 250 Hz-20 kHz (cut)


  • Output Power: 500W RMS @ 8 ohm, 800W RMS @ 4 ohm
  • Line Out: Balanced XLR, max. voltage 20 Vpp
  • Effect Send: Unbalanced, max. voltage 20 Vpp (pre-EQ)
  • Tuner Out: Unbalanced, max. voltage 2 Vpp
  • Speaker Out: Speakon/1/4" combo, 1/4"

Weight & Dimensions

  • Weight: 6.15 lbs / 2.79 kg
  • Height: 2.8 in. / 7.1 cm
  • Width: 10.87 in. / 27.6 cm
  • Depth: 10.1 in. / 25.6 cm
(Minimum ohm load for all Markbass heads is 4 ohms.)