Audio Technica AT4033 Condenser Mic

More details:

The side-address AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM`s 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.

Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients

Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity

The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use

Floating-construction capsule assembly provides isolation from noise and vibration

Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections

State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards

Custom shock mount provides superior isolation

SPECIFICATIONS

ELEMENT Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN Cardioid

FREQUENCY RESPONSE 30-20,000 Hz

LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave

OPEN CIRCUIT SENSITIVITY -32 dB (25.1 mV) re 1V at 1 Pa

IMPEDANCE 100 ohms

MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.;

155 dB SPL, with 10 dB pad (nominal)

NOISE 17 dB SPL

DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL

SIGNAL-TO-NOISE RATIO 77 dB, 1 kHz at 1 Pa

PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical

SWITCHES Flat, roll-off;

10 dB pad (nominal)

WEIGHT 13.4 oz (380 g)

DIMENSIONS 6.69" (170.0 mm) long,

2.10" (53.4 mm) maximum body diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

AUDIO-TECHNICA CASE STYLE R1