Shure PG58 Dynamic microphone

More details:

PG58-XLR includes a 15ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and Storage Bag.

Shure PG58 Features

Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.

Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.

Cartridge includes a neodymium magnet for high output level.

Internal shock mount for reduced handling noise.

Durable metal construction.

On/off switch for onstage control.

Hardened steel mesh ball grille that resists wear and abuse.

Integral "pop" filter reduces explosive breath sounds and wind noise.

Includes 15ft. (4.57m) cable, break-resistant mic clip and storage bag.

Shure PG58 Specifications

• Microphone Type - Dynamic (moving coil)

• Polar Pattern - Cardioid (unidirectional)

• Frequency Response - 60 to 15,000 Hz

• Polarity - Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector

• Output Impedance (at 1000 Hz) - 300 ohms

• Sensitivity (at 1000 Hz) - -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL

• Electromagnetic Hum Sensitivity - 26 dB equivalent SPL in a 1 millioersted field (60 Hz)

• Switch - Built-in On/Off switch

• Connector - Three-pin professional audio connector (male XLR type)

• Case - Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille

• Environmental Conditions - This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95 .

• Weight - Net: 321 g (11.3 oz) / Packaged: 908 g (2 lb)