QSC PLX1802 575W Professional Power Amplifier

£1,054.80 RRP £1,234.81

(including VAT @ 20%)

Available for order:

Estimated delivery to you: 28 Apr 14
FREE Delivery available.

Product Ref: 13310

QSC PLX1802 575W Professional Power Amplifier

Details

The PLX2 series is a range of premium quality, highpower amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine lightweight, superlative audio quality and proven QSC reliability. With power output up to 3,600 watts, PLX2 amplifiers are capable of providing ample clean, undistorted output to the most power hungry speaker systems.

View Full Description

Full Description

View Full Description

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.

The PLX1802 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.

Specifications:

STEREO MODE - both channels driven

  • 8 ohms
  • FTC 20 Hz - 20 kHz 0.05% THD: 320 W
  • EIA 1 kHz 0.1% THD: 330 W
  • 4 ohms
  • FTC 20 Hz - 20 kHz 0.05% THD: 525 W
  • EIA 1 kHz 0.1% THD: 575 W
  • 2 ohms EIA 1 kHz 1% THD: 900 W

BRIDGE MONO MODE

  • 8 ohms
  • 20 Hz-20 kHz 0.1% THD: 1100 W
  • EIA 1 kHz 0.1% THD: 1200 W
  • 4 ohms 1 kHz 1% THD: 1800 W * Signal to Noise (20 Hz - 20 kHz): -107 dB
  • Input Sensitivity @ 8 ohms: 1.28 Vrms
  • Gain @ 8 ohms: 32 dB
  • Output Circuitry: AB
  • Distortion (SMPTE-IM): Less than 0.02
  • Frequency Response: 20 Hz-20 kHz, -0.5 dB
  • Damping Factor: Greater than 200
  • Input Impedance: 20k ohms balanced, 10k ohms unbalanced
  • Input Clipping: 11 Vrms (+15 dBu)
  • Cooling: Variable-speed fan, rear-to-front air flow
  • Input Connectors, each channel: 3-pin XLR and 1/4" TRS balanced
  • Output Connectors, each channel: Neutrik® NL4 Speakon® and touch-proof binding posts (Both channels available on Ch 1 output)
  • Rear Panel Switches: Circuit Breaker
  • Front Panel Controls: Detented Gain Attenuator: 0 to ? dB, Power On/Off
  • Front Panel Indicators: Clip: Red LED, -10: Green LED, Signal (-35 dB): Green LED, Power: Blue LED

PROTECTION

  • Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection. Stable into reactive or mismatched loads
  • Load Protection: On/off muting, DC-fault power supply shutdown
  • Infrasonic: -3 dB, 8 Hz
  • DC fault: Power supply shutdown
  • Ultrasonic: -3 dB, 120 kHz
  • Short Circuit: Muting
  • Thermal: Limiting at 85° C, Muting at 90° C
  • Over Current: Active clip limiting
  • AC circuit breaker
  • High Line: Standard +15 , survive +25
  • Low Line: -40