View Full Description
With the new Xa-2 systems, once again DYNACORD is setting the highest standards in audio performance, reliability and price. Ideal for
Top-40 Indoor/Outdoor Live Events
High Power mobile DJ events
High Quality corporate events
High-Power speech reinforcement
High-quality neodymium components combined with new Constant Q horns and patented planar waveguide bass horns deliver maximum sound pressure and superlative audio performance.
The universally usable Xa 4000 active 2-way power amplifier provides Class H technology and a switching power supply. Xa 4000 power amps combine outstanding audio performance, highest reliability and operational safety allowing easy setup and operation of active 2-way systems with a crossover frequency of 140Hz between bass and mid/high cabinets. The power amp fs output capacity of 1100W/4ohms for the bass channel and 900W/4ohms for the mid/high channel allows the connection of up to four 8ohms cabinets per channel. The integrated frequency crossover separates the bass from the mid/high range at 140Hz. The x-over is carried out as a modified Butterworth-crossover with a slope of 18dB/octave. The crossover frequency of 140Hz allows the connection of basically any mid/high and bass cabinet. Using 2-or 3-way fullrange speaker systems . for example DYNACORD F150 . as mid/high cabinets is possible as well. Individual dB-scaled level controls for SUB and TOP channels, which are carried out as recess-mounted detent potentiometers provide a control range between +6dB and . ? allow combining bass and mid/high cabinets with quite different efficiency. The frequency response of the Xa 4000 particularly accounts for the requirements of .Live g applications. An integrated Lo-Cut filter attenuates low-frequency signals such as rumble and subsonic noise protecting the bass cabinets from being damaged by mechanical overload.
The DYNACORD FX 12 is concepted as a medium longthrow mid/high- frequency cabinet in coaxial design. It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances. The recommended active x-over frequency is 140 Hz, 18 dB/oct. Butterworth. In the lo-mid range an ND 12 A Electro-Voice loudspeaker chassis works into a conical horn. The 80x40 Constant Directivity horn, driven by an Electro-Voice 1.4" ND 6 neodymium driver delivers the frequency range above 1kHz. The FX 12 is equipped with a passive x-over (1kHz, 18 dB/oct). Every transducer is protected against thermal overload with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers? voice coils. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits ?soft? switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value
The DYNACORD FX 20 is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18" transducer. Frequency response is 30Hz - 150Hz (-10dB), so the crossover frequency to Mid-Hi cabinets can be chosen strictly application-oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits ?soft? switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX 20 cabinet is made of 15mm poplar plywood. All corner joints and braces are grooved and glued. The cabinet surface is covered with a heavy-duty black carpet. A powder- coated steel grille and an acoustic foam front protects the speakers. The connector panel uses two 4-pole Speakon connectors (IN/OUT) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the respective two Speakon connectors. When using DYNACORD power amp racks or system amplifiers, the whole system can be wired with 4-pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy-duty castors on the rear side guarantee easy and safe transport.
The product price includes 2 years' warranty and 30 day money back guarantee.
However, the Gear4music extended warranty scheme provides an enhanced service, and is designed to offer a higher level of protection than many 'free' warranties offered by some retailers and manufacturers.
The highlights of this enhanced warranty service are:
- Warranty is extended to 6 years from the date of delivery.
- Our Money Back guarantee is extended from 30 days to 180 days (terms apply after 30 days)
- Collection and delivery costs are included for the first 2 years
- Claim 50% cash back on the cost of the policy after 6 years if it has not been used!
- Warranty is transferable if the item is re-sold
- Loan or replacement equipment will be provided if the product isn't repaired within 30 days
- If an item can not be repaired, a similar alternative product or cash discount (as defined in this policy) will be offered
- The policy can be cancelled within 30 days, and at any time after that for a pro-rata discount
Please note that this extended warranty is currently only available on products sold within the EU or EEA, and is subject to the terms and conditions as detailed on the extended warranty certificate provided.
For customers in outlying areas of the country, the price of the Extended Warranty may be marginally higher, due to the potential for higher collection and redelivery transport costs.
This enhanced warranty is in addition to the standard Gear4music and manufacturer warranty policies, and the Gear4music terms and conditions of trade. No statement or condition of sale contained within these terms affects or restricts your statutory rights as defined under the Consumer Contracts Regulation 2014.
Once the product is delivered, you have 30 days to decide that you definitely want to keep it. If you decide it is not suitable for any reason, you can return it back to us for replacement or full refund, including standard delivery charges.
All Products are new unless stated, and include a minimum of 2 years warranty.
Some items are only eligible for money back guarantee if they are returned to us unused and sealed in the original packaging, and in the case of software, unregistered. These items include:
- CDs & DVDs
- In-ear Monitors
- Earplugs and Ear Protection
- Mouthpieces, Reeds etc… for Woodwind and Brass instruments
- Mouth / Lip Care Products
We are unable to accept returns of any custom made items designed to work together as a unique package, such as computer system built to a customer’s personal specifications. Exceptions may only be possible with prior agreement of the vendor, and may be subject to a cancellation fee.
This item usually qualifies for free standard delivery. Saturday and timed delivery services are also available as cost options when you add the item to your shopping basket.
If you also purchase items that do not
qualify for free delivery, some delivery charges may be applied to your
order which will be shown in your shopping basket.