Moog Minimoog Voyager Rack Mount Edition

More details:

The Minimoog Voyager Rack Mount Edition takes all the mind-bending power of the Minimoog Voyager and packages it in a 19" wide by 5U (8 3/4") high package, which is designed for rack-mount or table-top use.

The Voyager Rack Mount Edition contains all the synthesis functions of the award-winning Voyager. It also includes the Electric Blue back lit panel that we introduced with the Anniversary Edition Voyager, complete with front panel brightness control. A new feature is the switchable output mode. A slider switch on the rear panel selects -2dBm unbalanced, floating outputs, or +4 dBm, 600 Ohm electronically balanced outputs for professional applications. Also new is the Input Accessory Port, for CV/Gate Inputs.

The Voyager Rack Mount Edition can be controlled completely through MIDI. All front panel controls transmit and receive MIDI Continuous Controller messages. Match the RME (or up to 16 of them!) up with your existing Voyager to achieve some serious polyphony.

The Rack Mount Edition is now available from Moog Dealers.

Now, all Rack Mount Editions will have the upgraded software and hardware to allow the player 7 banks of 128 presets and the following capabilities

The External Mixer knob (just right of the display panel) has a dual function that allows you to rapidly change presets as opposed to continuously punching the cursor buttons.

MIDI Enhancements

• Allows you to send either 7 or 14 bit resolution from the Mod Wheel.
• Optionally reduces the amount of MIDI data being sent from the Touch Surface.

(These changes enable the Voyager to work better with older MIDI equipment.)

So many sounds to spark your creativity! Five-input mixer for combining the audio sources prior to filtering.

• Five Input Level controls adjust the relative levels of the oscillator, noise, and external audio input signals.
• Five Input switches enable the player to quickly switch individual audio signals in and out.
• External Level LED enables the player to set the correct external audio signal level.

The Envelopes Module generates two wide-range ADSR (Attack Decay Sustain Release) envelopes. The Filter Envelope sweeps the filter and is available for modulation shaping. The Volume Envelope shapes the overall volume.

• Two ATTACK controls determine the attack times of the envelopes.
• Two DECAY controls determine the decay time constants of the envelopes.
• Two SUSTAIN controls determine the sustain levels of the envelopes.
• Two RELEASE controls determine the release time constants of the envelopes.
• AMOUNT TO FILTER control determines how much the filter envelope will open and close the filter, from full negative (inverted envelope) to full positive (non-inverted envelope).
• ENVELOPE GATE switch selects whether the envelopes will be triggered by the keyboard or by programmable envelope gate sources, including Keyboard Gate, S+H Gate (LFO), and MIDI Clock, allowing independent triggering of the two envelopes.

AUDIO OUT RIGHT AND LEFT (MONO)
These are the main audio outputs. A slide switch allows selection of -2dBm unbalanced floating outputs, or +4 dBm,600 Ohm balanced outputs.

MIXER EXT IN
Plug any instrument-level or line-level audio signal in this jack to combine with the oscillator and noise signals prior to filtering.

MIX OUT/FILTER AUDIO IN
This is a TRS insert point that can be used to insert an effect between the output of the Mixer and the Input of the Filters using a standard insert cable. The output of the audio mixer appears here, before being fed to the filter. The Mixer output appears at the tip of this jack, the return to the Filters appears at the ring. If you plug something into this jack, that breaks the normal connection.