Z.VEX Vextron Mastotron Guitar Pedal

More details:

Operation:

Plug your guitar (or any effect's output) into the right hand input jack. Plug the output into an amp or other effect?s input. Set the amp for a warm clean tone on bypass. Turn on the pedal and rock out! Using a guitar or bass, turn the Relax/Push knob down a bit if you need to until the fuzz sounds immediate and tight. Turn the fuzz control until you're happy (I like it all the way up), and set the PW to square (counter-clockwise). Adjust the tone for the treble amount you want, and use the sub switch on 3 for full heavy subs for bass or 2 if the subs are overloading your amp. Try turning down the Relax/Push knob all the way. Now, turn up the PW knob until it gets all the way to the pulse side. Try turning up the Relax/Push knob now. For a strange effect, set the subs switch to 1 and then turn down the tone control all the way. You'll have to turn up the volume control with this setting.

PEDAL PLACEMENT

The Mastotron™ is best being placed first in your pedal chain, just after the guitar. You can set the amp for your favorite clean tone for the most blistering results, but a distorted sound can be very cool as well. Play it into your favorite distortion pedals or direct into the amp for different textures.

Features/Specifications:

• Battery Required: 9v The low current operation of this pedal's circuit will give longer battery life.

• Current Draw: Approximately 2mA.