Full Description
View Full Description
Durable Phaser Pedal With Authentic Phasing Guitar Effects
The Belcat PHS-605 Phaser Pedal produces authentic phasing guitar effects, courtesy of a simple control bay that consists of "Rate" and "Depth" dials. The result is far from as rudimentary though, with spacey warbles and mind-blowing, hypnotic swirls with the absolute minimum amount of tweaking. Hardware wise, the PHS-605 consists of a solid footswitch that can be operated with either a 9v Battery or an Adapter, set on top of a solid steel housing.
You don't have to worry about the Belcat Phaser in Bypass mode either; it operates with True Bypass Functionality. True Bypass sends input signal to output directly when the effector is off. The signal will flow well when the effector is off even in the absence of a power supply. These features together ensure this pedal an authenticity and enduring value for money.
Features/Specifications
Input Impedance: 1MΩ
Output Impedance: 1KΩ less
Rate Control: 100ms - 6.35s
Current Draw: 8.2mA
Connectors: Input Jack, Output Jack, DC Input
Controls: Rate, Depth
Bypass: True Bypass
Power Supply: 9V Alkaline Battery or DC 9V Adapter
Dimensions: W110 mm X H 60mm X D 53mm (4.3" X 2.4" X 2.1")
Warm Vintage Chorus Tones With No Loss Of Clarity
The Belcat CHR-604 Analog Chorus Pedal provides its user with layers of chorus sound, with a warm vintage tone that manages to retain clarity, the main bugbear of chorus effects of years gone by. Encased in a solid steel housing with an eye catching bird graphic, "Rate" and "Depth" controls help you dictate just how much chorus is required.
The CHR-604 makes the most of these tones via its True Bypass functionality. True Bypass sends input signal to output directly when the effect is turned off. The signal will flow well when the effector is off even in the absence of a power supply. These features together ensure this pedal an authenticity and enduring value for money.
Features/Specifications
Input Impedance: 1MΩ
Output Impedance: 1KΩ less
Rate Control: 1Hz - 10Hz
Current Draw: 7.7mA
Connectors: Input Jack, Output Jack, DC Input
Controls: Rate, Depth
Bypass: True-Bypass
Power Supply: 9V Alkaline Battery or DC 9V Adapter
Dimensions: W110 mm X H 60mm X D 53mm (4.3" X 2.4" X 2.1")Get The Flange Sound You Are After With The FLA-613
Flanging is an audio effect produced by mixing two identical signals together, with one signal delayed by a small and gradually changing period, usually smaller than 20 milliseconds. A flanger is an effects unit dedicated to creating this sound effect. The Belcat FLA-613 Flanger Pedal allows you to vary this time delay and create a flange effect of your own, thanks to the dedicated "Rate", "Regen" and "Depth" controls housed on the solid steel casing; a casing with a footswitch that can be operated with either a 9V battery or an adapter.
You don't have to worry about the FLA-613 in Bypass mode either; it operates with True Bypass Functionality. True Bypass sends input signal to output directly when the effector is off. The signal will flow well when the effector is off even in the absence of a power supply. These features together ensure this pedal an authenticity and enduring value for money.
Features/Specifications
Input Impedance: 470K
Output Impedance: 1KΩ less
Delay Time: 1ms 13ms
Speed Range: 0.1Hz 13Hz
Current Draw: 20mA
Connectors: Input Jack, Output Jack, DC Input
Controls: Rate, Regeneration, Depth
Bypass: True Bypass
Power Supply: 9V Alkaline Battery or DC 9V Adapter
Dimensions: W110 mm X H 60mm X D 53mm (4.3" X 2.4" X 2.1")Jack - Jack Patch Cable, 15cm, Pack of 6
6.3mm Jack Plugs
Heat-Shrunk Cable Ends for Reduced Strain
15cm length
Pack of 6