Tama HC72WN Roadpro Straight Cymbal Stand

More details:

The toothless Quick-Set Tilter securely holds its position using the friction of six metal disc plates instead of traditional gears, so you can adjust it to any desired angle. This mechanism also has a more durable structure than a conventional gear tilter.

By inserting nylon washers into the leg stand joints Tama have improved durability and made the leg action much smoother!

You loosen and tighten the T-bolt/nut of the die-cast joint every time you change the height of the cymbal, making the T-bolt/nut one of the hardest-working parts. At each die-cast joint, the T-nut/bolt is combined with a pressure plate and Nylon Bushing. With this design, removing and replacing a worn bolt or bushing is fast and easy.

By simply gripping and pressing the two buttons on the sides of the unit, users can attach and remove the Cymbal Mate with just one touch. This makes setting up cymbals a snap. Of course, as is the case with an ordinary Cymbal Mate, it's easy to make fine adjustments to cymbal swing by rotating the unit.

The cymbal bottom protects the cymbal's centre hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down.

Are cymbal stands just for supporting cymbals? We think cymbal stands are also musical instruments. All TAMA cymbal stands in the Roadpro and Stage Master lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying.

Placing a threaded steel insert nut inside the tripod base provides much more strength and makes stripping much less likely than with the traditional method of cutting the threads directly into the die-cast section.

Features / Specifications:

• 28.6mm diameter base section tubing
• Double braced legs
• Quick-set tilter
• Quick-set cymbal mate